|
INTERFACCE
.jpg)  
M2TECH
HIFACE
€.
159,00
Per
offerta e promozioni Telefona/E-mail
interfaccia a penna USB per PC o MAC per
ascolto di musica liquida - connettori RCA
 hiFace
Hi-End S/PDIF Output Interface DETAILS Highest quality digital audio up to
192kHz/24bit S/PDIF audio format available from your PC or MAC Very low jitter
oscillators and proprietary drivers Compact size (2x2.2x10.2cm) with hi-end
performances hiFace USB interface has been conceived to obtain the highest
quality digital audio signal using a PC or MAC. hiFace input format is a data
stream signal with sampling frequency/resolution up to 192kHz/24bits, available
from a PC or MAC USB port. A very high quality S/PDIF stereo audio output signal
is available from hiFace for your Hi-Fi system DAC (Digital to Analog Converter).
HiFace looks like a small USB pendrive, featuring a very compact size. Internal
very low jitter oscillators and proprietary drivers allow for playing
192kHz/24bits audio files that feature the best signal quality. FEATURES
1) LOW JITTER, LOW PHASE NOISE, HIGH STABILITY OSCILLATORS Most audio interfaces
and USB-provided DACs refer the data stream clock to the same USB interface
clock, that often suffers a very heavy jitter (short range oscillator frequency
variations). Thanks to two quartz precision oscillators used on M2Tech hiFace,
clock source for output data stream features a very low jitter. A more stable
clock is recovered by DAC S/PDIF receiver; a low jitter produces a very limited
sound image distortion and degradation. Phase noise (main responsible for jitter)
is also very low: this guarantees a short and long range clock stability, also
reinforced by a board supply voltage regulation (e.g. at environmental
temperature stability is 2-5ppm approximately, compared to 50-100ppm performed
by oscillators normally used on commercial CD players). 2) PROPRIETARY
DRIVERS The standard audio drivers available on the market (e.g. Microsoft
Windows operating system) dictated constraints can be overcome thanks to hiFace
proprietary drivers: they allow for transferring audio data, maintaining the
original file quality without any loss of resolution quality; also, sampling
frequency constraints are overcome, while Microsoft and ASIO drivers oblige to
operate at no more than 96kHz. When hiFace is used together with a player
application such as FooBar (available for free on Internet), you can transfer S/PDIF
stream music files to a D/A converter at 192kHz/24bits maximum frequency/resolution,
avoiding undesired PC or MAC audio mixer data processing during the data
transfer from hard disk to interface. Presently, Windows XP, Vista, Windows 7
drivers are available, as well as Mac drivers for 10.4, 10.5 and 10.6. 3)
COMPACT SIZE AND EASE OF USE M2Tech hiFace features a very compact size and can
be directly (or using an accessory USB A-A adapter, not supplied with hiFace)
connected to a High Speed USB 2.0 port of any computer. A very high electric and
mechanical performance RCA gold connector provides an output signal, ready to be
connected to a Hi-End system. No external power supply is required, as hiFace
draws its power from USB bus itself and regulates it with its internal
regulators. hiFace USB interface connected to a last generation mini PC provided
with a High Speed USB port makes for a complete music transport system at very
low prices (in the range of few hundreds Euros). Such system allows for
listening any density and resolution music files, playing own CD's using a CD
ROM drive, obtaining access to more than 10,000 web radio, many of which
broadcast their transmissions with CD quality. SPECIFICATIONS Connections
Input 1 x USB A type male Output 1 x RCA female I/O Standard Input USB 2.0
Format Output S/PDIF Stereo Digital Audio Format Sampling Frequency 44.1kHz,
48kHz, 88.2kHz, 96kHz, 176.4khZ, 192kHz Resolution 16 up to 24 bit Dimensions
10.2(d) x 2.2(h) x 2(w) cm Power Supply 5V DC from USB bus Temperature from 0°C
to 70°C Weight 50gr approx.
M2TECH
HIFACE
TWO
€.
179,00
Per offerta e promozioni Telefona/E-mail
interfaccia a penna USB per ascolto di
musica liquida - conforme allo standard USB 2.0 Audio (non serve il driver per
Mac e Linux) e fornito di driver per Windows - compatibile Linux - compatibile
ASIO in Windows
DETAILS Highest quality digital audio up to 192kHz/24bit S/PDIF audio format
available from your PC, MAC or Linux computer. Very low jitter oscillators,
asynchronous transfer on USB. Compact size (2x2.2x10.2cm) with hi-end
performances hiFace Two USB interface has been conceived to further improve the
performance and ease of use of the acclaimed and award-winning hiFace. hiFace
Two input format is a data stream signal with sampling frequency/resolution up
to 192kHz/24bits, compliant to USB Audio 2.0 specificastions, available from a
PC, MAC or Linux computer USB port. A very high quality S/PDIF stereo audio
output signal is available from hiFace for your Hi-Fi system DAC (Digital to
Analog Converter). HiFace looks like a small USB pendrive, featuring a very
compact size. Internal very low jitter oscillators allow for playing
192kHz/24bits audio files that feature the best signal quality. hiFace Two is
even easier to use than the hiFace. No drivers are necessary with either Mac and
Linux computers, while a single standard driver is required for Windows
computers. While the old hiFace offered Direct Sound, Kernel Streaming and
WASAPI transfer modes, hiFace Two adds ASIO mode to enable interfacing to pro
players and software tools. hiFace improves the audio performance over the
hiFace by a new output circuit compliant with S/PDIF levels, linear regulators
in place of switching ones and a clickless operation even when skipping
tracks.FEATURES 1) LOW JITTER, LOW PHASE NOISE, HIGH STABILITY OSCILLATORS Most
audio interfaces and USB-provided DACs refer the data stream clock to the same
USB interface clock, that often suffers a very heavy jitter (short range
oscillator frequency variations). Thanks to two quartz precision oscillators
used on M2Tech hiFace, clock source for output data stream features a very low
jitter. A more stable clock is recovered by DAC S/PDIF receiver; a low jitter
produces a very limited sound image distortion and degradation. Phase noise (main
responsible for jitter) is also very low: this guarantees a short and long range
clock stability, also reinforced by a board supply voltage regulation (e.g. at
environmental temperature stability is 2-5ppm approximately, compared to
50-100ppm performed by oscillators normally used on commercial CD players). 2)
USB 2.0 AUDIO COMPLIANCE No more needs for custom driver. Using the hiFace Two
is very easy. Just connect it to your Mac or Linux computer and it will be
immediately visible in the devices list and ready to use. A driver is still
necessary for Windows computers, which enables for DS, KS, WASAPI and ASIO mode.
3) COMPACT SIZE AND EASE OF USE M2Tech hiFace features a very compact size and
can be directly (or using an accessory USB A-A adapter, not supplied with
hiFace) connected to a High Speed USB 2.0 port of any computer. A very high
electric and mechanical performance RCA gold connector provides an output signal,
ready to be connected to a Hi-End system. No external power supply is required,
as hiFace draws its power from USB bus itself and regulates it with its internal
regulators. hiFace USB interface connected to a last generation mini PC provided
with a High Speed USB port makes for a complete music transport system at very
low prices (in the range of few hundreds Euros). Such system allows for
listening any density and resolution music files, playing own CD's using a CD
ROM drive, obtaining access to more than 10,000 web radio, many of which
broadcast their transmissions with CD quality. SPECIFICATIONS Connections Input
1 x USB A type male Output 1 x RCA or BNC female I/O Standard Input USB 2.0
Audio Format Output S/PDIF Stereo Digital Audio Format Sampling Frequency
44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4khZ, 192kHz Resolution 16 up to 24 bit
Dimensions 10.2(d) x 2.2(h) x 2(w) cm Power Supply 5V DC from USB bus
Temperature from 0°C to 70°C Weight 50gr approx.
UNITA CLOCK
.jpg)
M2TECH
HIFACE
Evo II
€. 599,00
Per
offerta e promozioni Telefona/E-mail
interfaccia per PC o MAC per ascolto di
musica liquida (senza alimentatore
COSTO + 20,00 euro)
hiFace Evo
Hi-End S/PDIF Output Interface DETAILS hiFace Evo by M2Tech is the new statement
in high quality computer audio interfaces. Hosted in a compact and stylish
aluminium case, hiFace Evo is capable of flawlessly transfer audio data up to
192kHz, 24 bits to virtually every DAC or A/V receiver around, thanks to its
comprehensive outputs set. hiFace Evo incorporates the same leading edge
technology as the classic hiFace – with some plus. Asynchronous operation up to
192kHz is used in conjunction with proprietary drivers which allow for Kernel
Streaming, Direct Sound and WASAPI operation (the latter under Windows vista and
7). Windows and Mac drivers are already available. Very high precision, very low
phase noise (jitter) crystal oscillators are used. To further improve their
performance, they have a dedicated shunt voltage regulator which ensures a very
low noise and spurious-free supply. hiFace Evo is powered by an external power
supply (not included), to avoid the dirty USB bus supply from negatively
affecting hiFace Evo’s performance. Linear regulators are used all around, to
allow all jitter-sensitive digital circuits to operate at their best. Also, a
low-pass filter is provided at supply input to further reduce any bad influence
from the supply. hiFace Evo can be powered by an external wall adapter (9V 1A
will fit), or with a 9V alkaline battery, or with a 7.2V/10.8V Lythium battery.
Several outputs are available at the same time: coax on RCA, coax on true 75
Ohms BNC, AES/EBU on male XLR, optical on Toslink™ (Toslink™ is guaranteed to
operate up to 96kHz, though we got operation up to 176.4kHz on certain setups),
optical on ST (for high-speed operation up to 192kHz and up to 1.6km or 1 mile),
straight I2S for direct connection to DIY DACs on RJ-45 (NOT plug-in compatible
with NorthStar products!). All outputs, except straight I2S, are galvanically
isolated (coax and AES/EBU via a pulse transformer). AES/EBU output can be set
to professional or consumer mode by an internal jumper. In addition, an input
for an external clock is available, for those who have a extremely precise and
stable clock generator to be used with hiFace Evo. hiFace evo automatically
recognizes the presence of the clock on its input and switches on it whenever
available. This input is also galvanically isolated via a pulse transformer.
Three LEDs indicate power, external clock presence and incoming data from the
PC. Connection to the PC is via a type B female USB connector. FEATURES 1)
LOW JITTER, LOW PHASE NOISE, HIGH STABILITY OSCILLATORS Most audio interfaces
and USB-provided DACs refer the data stream clock to the same USB interface
clock, that often suffers a very heavy jitter (short range oscillator frequency
variations). Thanks to two quartz precision oscillators used on M2Tech hiFace,
clock source for output data stream features a very low jitter. A more stable
clock is recovered by DAC S/PDIF receiver; a low jitter produces a very limited
sound image distortion and degradation. Phase noise (main responsible for jitter)
is also very low: this guarantees a short and long range clock stability, also
reinforced by a board supply voltage regulation (e.g. at environmental
temperature stability is 2-5ppm approximately, compared to 50-100ppm performed
by oscillators normally used on commercial CD players). 2) PROPRIETARY
DRIVERS The standard audio drivers available on the market (e.g. Microsoft
Windows operating system) dictated constraints can be overcome thanks to hiFace
proprietary drivers: they allow for transferring audio data, maintaining the
original file quality without any loss of resolution quality; also, sampling
frequency constraints are overcome, while Microsoft and ASIO drivers oblige to
operate at no more than 96kHz. When hiFace is used together with a player
application such as FooBar (available for free on Internet), you can transfer S/PDIF
stream music files to a D/A converter at 192kHz/24bits maximum frequency/resolution,
avoiding undesired PC or MAC audio mixer data processing during the data
transfer from hard disk to interface. Presently, Windows XP, Vista, Windows 7
drivers are available, as well as Mac drivers for 10.4, 10.5 and 10.6. 3)
COMPACT SIZE AND EASE OF USE M2Tech hiFace features a very compact size and can
be directly (or using an accessory USB A-A adapter, not supplied with hiFace)
connected to a High Speed USB 2.0 port of any computer. A very high electric and
mechanical performance RCA gold connector provides an output signal, ready to be
connected to a Hi-End system. No external power supply is required, as hiFace
draws its power from USB bus itself and regulates it with its internal
regulators. hiFace USB interface connected to a last generation mini PC provided
with a High Speed USB port makes for a complete music transport system at very
low prices (in the range of few hundreds Euros). Such system allows for
listening any density and resolution music files, playing own CD's using a CD
ROM drive, obtaining access to more than 10,000 web radio, many of which
broadcast their transmissions with CD quality. SPECIFICATIONS Size:
105x46x104mm (w x h x d, case) 105x50x142mm (w x h x d, total) Weight: 380g
Sampling frequencies (kHz): 44.1, 48, 88.2, 96, 176.4, 192 Resolution (bits): 16
to 32 Inputs: USB 2.0, supply, master clock Outputs: S/PDIF x2 (RCA & BNC) AES/EBU
(XLR) optical Toslink™ optical ST I2S (RJ-45). Supply voltage: 7-11VDC (15VDC
max.) Supply current: 140mA (idle, no output connected) Master clock input
voltage: 3.3VPP I2S output voltage: LVCMOS (3.3V) with 25mA current capability
on each line
M2TECH
HIFACE
CLOCK
II
€. 599,00
Per
offerta e promozioni Telefona/E-mail
generatore di clock di precisione per hiFace
Evo e altri apparecchi; genera il clock riservato all'hiFace Evo e un clock di
uso generico per altri apparecchi, con frequenza selezionabile in valori
diversi; utilizza oscillatori compensati in temperatura custom; alimentabile con
l'adattatore da 9V in dotazione oppure con Evo Supply
Evo Clock Precision clock generator DETAILS
Word clock and master clock generation; lowest phase-noise, high precision,
custom made temperature-compensated oscillators; dedicated matched line master
clock output for hiFace Evo; matched line option for word clock output; word
clock frequency up to 384kHz, plus 5.6448/6.144MHz and 11.2896/12.288MHz “super
clock”; ultra-low noise regulators. FEATURES Evo Clock is a cost-effective,
high-performance clock generator based on extremely low phase noise, high
precision TCXO’s, custom made for M2Tech. Two outputs are available: one master
clock dedicated to hiFace Evo, capable of 22.5792MHz or 24.576MHz (depending on
settings) and delivering 3.3Vpp on 75 Ohms matched line, and a general purpose
word clock output with selectable output frequency up to 384kHz, with the option
for “super clocks” 128x and 256x. The latter has a line matching option and can
deliver 3.3Vpp on both high impedance and 75 Ohms loads. Ultra-low noise
regulators allow for a very clean supply for both oscillators and the
conditioning logic, leading to fully exploiting the oscillators performance.
SPECIFICATIONS Size: 105(w) x 46(h) x104(d) mm Weight: 350g (approx.) Word Clock
Frequencies (kHz): 44.1, 48, 88.2, 96, 176.4, 192, 352.8, 384 Super Clock
Frequencies (MHz): 5.6448, 6.144, 11.2896, 12.288 Master Clock Frequencies
(MHz): 22.5792, 24.576 Outputs: 3.3Vpp on 75 Ohms BNC matched line (master
clock), 3.3Vpp on 75 Ohms BNC matched line or hi-Z line (word clock) Phase noise
(@10Hz): -100dBC/Hz min. Phase noise (@100Hz): -130dBC/Hz min. Phase noise
(@1kHz): -145dBC/Hz min. Precision: +/- 1.5ppm 0°C to 50°C Temperature stability:
+/- 1ppm Vcc stability: +/-0.3ppm Supply voltage: 9V Supply current: 150mA
DAC
M2TECH
HIFACE DAC €.
179,00
Per offerta e promozioni Telefona/E-mail
DAC 384/32 a pennetta ad elevate prestazioni,
suono cristallino anche con files 44.1/16, interfaccia USB 2.0 Audio Class
compatibile; l'uscita analogica basata su un connettore 3.5mm stereo jack offre
2Vrms che possono essere accoppiati agli ingressi linea di preamplificatori e
amplificatori integrati ma può pilotare anche un'ampia gamma di cuffie
M2TECH
Evo
DAC TWO
€. 549,00
Per offerta e promozioni Telefona/E-mail
convertitore D/A, conversione DXD e DSD, risoluzione 32 bit
sulla porta USB 2.0, ingressi coassiale ed ottico S/PDIF, uscite single-ended su
RCA femmina, controllo remoto IR con HID, può essere alimentato dal bus USB o da
qualunque alimentatore 7.5V - 15V, si raccomanda Evo Supply Two
M2TECH
Evo
DAC TWO + €.
749,00
Per offerta e promozioni Telefona/E-mail
convertitore D/A, conversione DXD e DSD, risoluzione 32 bit sulla porta USB
2.0, ingressi coassiale ed ottico S/PDIF, uscite single-ended su RCA femmina,
ingresso clock suBNC femmina, info su uscita clock su Toslink™,controllo remoto
IR con HID, può essere alimentato dal bus USB,dall'adattatore a muro da 9V o da
qualunque alimentatore 7.5V - 15V, si raccomanda Evo Supply Two
M2TECH
Evo
PHONODAC TWO
€. 1.340,00
Per offerta e promozioni Telefona/E-mail
Phono DAC utilizzabile come: Preamplificatore Phono - Front-end analogico per
rippare su computer - Convertitore Digitale Analogico - Front-end Analogico per
DSP
DETAILS DXD A/D conversion, DXD and DSD D/A conversion, 32 bits
resolution, coaxial S/PDIF inputs,single-ended analog inputs and outputs on
gold-plated RCA females, IR remote control with HIDcapability, external clock
input with clock info output, phono EQ in digital domain, input gain 0dBto 62dB,
input impedance continuously settable 10 Ohms to 50k Ohms, same form factor of
all EvoTwo products, can be powered by any 7.5V to 15V power supply, Evo Clock
Two and Evo Supply Two recommended. FEATURES The Evo PhonoDAC Two is a
very high value-for-money digital/analog combo capable of converting analog to
digital up to DXD and DXD and DSD to analog.Its bi-directional USB 2.0 Audio
Class compliant port is natively supported (no driver needed) byOSX and Linux.
An ASIO-compliant driver for Windows is provided.High precision, low-jitter
clocks allow for exceptional detail resolution, maximizing the 32-bitcapability
of the ESS Sabre ES9018K2M (D/A) and ES9102S (A/D)conversion IC’s.The Evo
PhonoDAC Two versatile analog input stage allows for setting it’s gain from 0dB
to62dB, allowing for any low-output cartridge to be directly coupled to it, as
well as line-level sourceslike CD players, tuners, tape decks, etc.Input
impedance may be set to any value between 10 Ohms and 50,000 Ohms, accommodating
allkind of cources.The Evo PhonoDAC Two is capable of performing real-time,
digital domain phono equalization,using any of the 26 EQ curves provided with
it. Ancillary filters like anti-rumble, anti-hiss and MPX allow for best
playback and ripping fromwarped, scratched or worned records, as well as from
cassette tapes or FM and AM broadcast. The Evo PhonoDAC Two de-jitter feature
allows for exceptionally good performance from coaxial and connection.The Evo
PhonoDAC Two uses high quality polypropylene capacitors and a low-noise opamp
inthe analog sections (input and output) for best sonic results.The IR remote
control allows for accessing all Evo PhonoDAC Two features (volume, balance,
muting, input selection and many other menu settings), as well as taking
advantage of the HID protocol to control the player on the computer without
manually accessing the keyboard. The Evo PhonoDAC Two can be powered by the
stock wall adaptor in budget conscious setups, while better performance can be
obtained with a good power supply such as the Evo Supply Two SPECIFICATION
SPCM sampling frequency: 44.1 to 384kHz on USB (A/D and D/A) 44.1kHz to
192kHz on coax PCM resolution: 16 to 32 bits on USB (A/D and D/A) 16 to 24 bits
on coaxial DSD sampling frequency: 2.8224 to 11.2896MHz (USB only) Inputs: USB
on USB type B female, coaxial on RCA female, analog on stereo RCA female
Outputs: USB on USB type B female, analog on stereo RCA female Analog
input sensitivity: 2.5Vrms (gain 0dB), 2mVrms (gain 62dB) Output voltage:
2.5Vrms (@ 0dBFS) THD+N: 0,0008% (1kHz, 0dBFS) SNR: 118dB (Analog to
analog, 20Hz-20kz, 1kHz, A-weighted) 120dB (USB to analog, 20Hz-20kz,
1kHz, A-weighted) Clock precision: 10ppm (0-60°C) Supply voltage:
7.5V to 15V, 400mA Supply input: 5.5/2.1mm jack, positive on tip
Size: 105(w)x46(h)x104(d)mm Weight: 250g
.jpg)
M2TECH
YOUNG DAC
dsd
€. 1.340,00
Per offerta e promozioni Telefona/E-mail
convertitore D/A con ingresso USB asincrono in Classe 2, ingressi S/PDIF, AES/EBU
ed ottico, uscite bilanciate e single-ended (con adattatori), telecomando,
filtro passivo anti-alias, circuito di cancellazione current mode offset,
controllo volume analogico controllato digitalmente, massimo voltaggio di uscita
selezionabile 2.5Vrms (SE) - 10Vrms (bilanciato), abilitato HID
Young 384/32 D/A converter DETAILS
High-speed asynchronous USB connection Oversampling filters with minimum
pre-echo and phase linearity S/PDIF, AES/EBU, Toslink digital inputs Line level
single-ended on RCA output connectors Encased in a stylish aluminium case.
FEATURES Young is a high performance, very high value-for-money D/A converter
capable of handling up to 384kHz sampling rate and 32 bits resolution (USB
input). It features a high speed asynchronous USB input based on the hiFace
technology, further developped to allow for higher sampling rates. A
comprehensive input set (S/PDIF on RCA and BNC, AES/EBU on XLR and optical on
Toslink) provide great connection versatility. Despite its price, Young
encopasses a leading edge technology for data handling and processing. A high
performance oversampling filter, custom-made on a programmable logic device (FPGA)
implements minimum-phase filters optimized for sound quality which allow for a
very low noise floor. A 32 bits -D/A integrated circuit is used in a
non-conventional mode to allow for 768kHz internal operation. The synergy
between the DAC IC and the custoim oversampler allows for exceptionally low
noise floor and THD. The output buffer uses a special operational amplifier with
very low noise and THD thanks to its class-A biased output stage. The small size
and stylish look of the Young allow for a uninvasive placement in every living
space. SPECIFICATIONS Size: 200(w) x 50(h) x 200(d) mm Weight: 1Kg approx.
Sampling Frequencies(kHz): 44.1, 48, 88.2, 96, 176.4*, 192*, 352.8**, 384**
Resolution: 16 up to 24 bit (S/PDIF, AES/EBU, optical), 16 to 32 bit (USB)
Frequency response: 10-20kHz +0.1/-0.5dB (fs = 44.1kHz) 10-90kHz +0.1/-0.1dB (fs=384kHz)
SNR: 121dB (A weighted, 192kHz, 24 bits, 20kHz bandwidth) THD+N: 0.0003%
(192kHz, 24 bits) Inputs: 2 x S/PDIF (RCA and 75 Ohms BNC) 1x AES/EBU (XLR) 1x
optical (Toslink) 1x USB (USB female Type B) Output: single ended on RCA female
Output voltage: 2,65Vrms (7.5Vpp @ 0dBFS) Supply voltage: 15V-18VDC Supply
current: 240mA@15V
/JOPLIN%20(2).jpg)
M2TECH
JOPLIN
384 / 24 ADC
€. 1.990,00
Per offerta e promozioni Telefona/E-mail
Convertitore A/D operante fino a 384kHz e 32
bit con interfaccia USB 2.0 Audio class compatibile. Guadagno dello stadio
analogico variabile da 0dB a 65dB per interfacciabilità diretta di testine phono
(ripping del vinile). Equalizzazioni phono selezionabili (RIAA, FFRR, Mercury,
ecc.) oppure flat. Ingresso S/PDIF ausiliario per convogliare tramite USB
segnali digitali su computer privi mdi ingressi digitali. Uscite S/PDIF, AES/EBU
e TosLinik
DETAILS
High-speed asynchronous USB connection. Single-ended stereo input on RCA.
S/PDIF, AES/EBU and Toslink digital outputs. Auxiliary S/PDIF input for bridging.
Selectable input gain 0dB to 65dB. Wide choice of equalization curves in digital
domain. Various filter options (anti-rumble, anti-hiss, MPX). Input
impedance matching for MM and MC phono cartridges. Remote control.
Encased in a stylish aluminium case. FEATURES Joplin MkII is a high
performance A/D converter capable of handing up to 384kHz sampling rates and 32
bits resolution (USB output). It features a high speed asynchronous USB input
based on the hiFace Two technology, further developped to allow for higher
sampling rates. A comprehensive output set (S/PDIF on RCA, AES/EBU on XLR and
optical on Toslink) provide great connection versatility. Also, an auxiliary S/PDIF
digital input on RCA allows for re-using the digital connection used for the
Joplin for a digital source, as well as for redirecting the output from a
digital source to a computer which is not provided with an S/PDIF input. Despite
its price, Joplin encopasses a leading edge technology for data handling and
processing. An FPGA is used to provide a seamless connection between the
ADC IC and the USB port (both operating in master mode for low jitter reasons),
as well as for a large number of important clock and data routing tasks, not to
mention the VU-meter drive. The analog stage is based on the best PGA (Programmable
Gain Amplifier) available on the market, and allows for gain as high as 65dB (equivalment
to 1.43mVrms for 0dBFS). A comprehensive set of equalization curves can be
selected, to accommodate all phono formats ever used from 1925 to the present
day, plus eq curves for reel-to-reel tapes with straight output from the
playback head. The equalizers digital gain allows for using cartridges
with output voltage as low as 100uV. A comprehensive set of input
impedance values allow for interfacing both MM and MC cartridges, with an extra
value specific for high output MCs. The small size and stylish look of the
Joplin allow for a uninvasive placement in every living space.
ALIMENTATORI
ESTERNI
M2TECH
SUPPLY
TWO
€. 489,00
Per
offerta e promozioni Telefona/E-mail
alimentatore a
bassissimo rumore adatto ai prodotti EVO
DETAILS The Evo
Supply Two is a very low noise 9V power supply dedicated to the Evo Two Series
products. It is provided with three outputs which deliver clean current from a
low noise, discrete components regulator. Outputs are switched with a rele
operated by a button on the front panel. Overcurrent protection is included on
each output. The very-low-noise regulator features the same basic design
as the Van Der Graaf, ensuring a residual noise which rivals that of the best
high current batteries, with the extra bonus of a very long trouble-free life.
FEATURES 1) THREE OUTPUTS WITH TOTAL 2A CURRENT CAPABILITY. The Evo Supply Two
has enough current capability to power any combination of Evo Two or legacy Evo
products. 2) ULTRA-LOW-NOISE, DISCRETE COMPONENTS REGULATOR. A carefully thought
design which allows for exceptional performance from the lightest load up to the
rated current delivery. 3) FULL PROTECTION AGAINST OVERLOADS AND SHORT-CIRCUITS.
The output polyswitch fuse avoids damages even in case of continuous
short-circuit at one or more outputs.
M2TECH
HIFACE
POWER
€. 599,00
Per
offerta e promozioni Telefona/E-mail
alimentatore esterno per HiFace Evo ed
altri apparecchi M2Tech a 9V, dotato di batteria agli ioni di Litio e
caricabatterie incorporato; stessa estetica di HiFace Evo
Cavo di uscita per EVO Supply + 38,00 Batteria di ricambio per EVO Supply 85,00
euro
Evo Supply High Performance Power Supply
DETAILS Evo Supply is a battery-based high performance power supply. It’s the
perfect companion to the hiFace Evo and other 9V-operated M2Tech devices. Evo
Supply features a Li-Ion battery with 2200mAh capacity (minimum), an integrated
battery charger and a low-noise regulator which is used to provide current to
the load while the battery is being charged, thus ensuring continuous operation
to the load. Charge time is about three hours, the best choice to ensure a long
battery life. Evo Supply delivers up to 1A (peak) on 9V (low-noise
regulator) or on 9.5V to 11V (battery). Two outputs are available for more
versatility. A switch allows for turning the load off when not used to save on
battery charge. Another switch allows to select the operation mode: automatic
charge or charge inhibit. Two leds indicate the presence of the wall adaptor and
the charge in progress. In automatic charge mode the battery charger starts
charging the battery every time the battery voltage drops below a low threshold.
During the charge, the low-noise regulator feeds current to the load. At the end
of the charge process, the output reverts to the battery. In charge inhibit
mode, the battery is used down to the low threshold and then the load is
disconnected to avoid excessive depletion. Charge is then started by switching
to automatic charge mode. The battery is protected against overcharge,
overcurrent and excessive depletion. A 15V/2A detachable wall adaptor provides
current for battery charging and load powering when the battery is being charged.
The user may disconnect the wall adaptor after battery is fully charged in order
to reduce interferences to a minimum. Evo Supply features heavy duty
output connectors for reliable contacts Two cables terminated with 5.5/2.1mm
plug (positive on tip) and a universal power wall adaptors are included in the
package. FEATURES 1) LONG BATTERY DURATION: around 7 hours when powering
the hiFace Evo. 2) VERY LOW NOISE even when using the internal regulator.
3) STYLISH ALUMINUM CASE matches the look of the hiFace Evo.
SPECIFICATIONS Size: 105x46x104mm (w x h x d, case) 105x50x150mm (w x h x d,
total) Weight: 500g (800g with wall adaptor) Supply voltage: 15VDC Supply
current: 2A peak Output voltage: 9-11V (battery directly connected to output)
Output current: 1A peak, 500mA continuous Inputs: supply on 5.5/2.1mm socket
(positive on tip) Outputs: 2 x Bulgin heavy duty female connectors
M2TECH
VAN DER GRAAF
€. 949,00
Per offerta e promozioni Telefona/E-mail
alimentatore a bassissimo rumore adatto a
tutti i prodotti M2Tech
DETAILS Very low noise, discrete components regulators, selectable output
voltage on some outputs, activation and shut-down programmable sequence,
universal voltage input. FEATURES Van der Graaf is a very high
performance, very low noise power supply suitable to power all M2Tech products.
Thanks to its comprehensive outputs set and the settable output voltage for some
outputs, user can power every M2Tech product, from 9V Evo units to 15V products
like Young DSD and Joplin ADC, to the high-power Marley. Its very low output
noise (comparable to that of a Li-Ion battery), even at rated load, allows for
incredibly silent sonic background and finest detail resolution, markedly
improving every powered product's performance. Fault-proof robustness is
achieved by solid-state, automatically resettable fuses (polyswitch). In order
to optimize the powering sequence of the units connected to the Van der Graaf,
the user can program
AMPLIFICATORE CUFFIE
M2TECH
MARLEY
€. 1.340,00
Per offerta e promozioni Telefona/E-mail
Amplificatore per cuffie dual-drive Classe
A
DETAILS Pure class-A power amplifiers, dual stereo layout to drive two
headphones with independent volume setting, bridging feature to drive one
headphones set in balanced mode, preamplifier output to drive power amplifiers,
two inputs with tape output, auxiliary input for high current, low noise power
supply. FEATURES Marley is a very high performance headphones amplifier
conceived to give best sound quality with every kind of headphones, from small
in-ear models to expensive and challenging planar transducers devices. Its pure
Class-A, discrete components amplifiers deliver crystal-clear sound at any level
up to 8Vrms in single-ended mode (that is, driving headphones provided with
standard 6.35mm jack) or 16Vrms in balanced mode (that is, driving headphones
provided with 4-pin XLR jack). Two stereo amplifiers are fitted into the Marley,
each one with its volume control. This way, two headphones can be driven in
single-ended mode to allow two listeners to enjoy their music at their favourite
listening level. On the other hand, purist audiophiles using headphones with
balanced drive capability can set the Marley in balanced mode, obtaining 6dB
more SPL and improved sound quality. Features include input switching, preamp
output to drive a power amplifier, tape output, balance, muting, mode selection
(single-ended or balanced), volume display mode selection, auto switch-off.
Volume can be set in 1dB steps between -78dB and 0dB. Muting attenuates the
level by 20dB when needed. Auto switch off is a cool feature implemented to
comply with energy saving regulations which will also be useful to users who
like late night listening and falling asleep while enjoying their music. Power
capability is also awesome for such a small unit: 4Wrms per channel on 8 Ohms
and a SNR of 120dB (A-weighted) allow for driving high sensitivity speakers with
outstanding results (output adaptor needed). Marley is provided with a 15V-30VA
wall adaptor. An input for an external high-current, low-noise power supply is
also present on the rear panel.
SPECIFICATIONS Inputs: 2 x line in on female, gold-plated RCAs Outputs: 2 x 1/4”
stereo jack (single-ended 4-pole female XLR (balanced) pre out on female,
gold-plated RCAs tape out on female, gold-plated RCAs Supply inputs: 5.5/2.1mm
jack, positive on tip4-pole male XLR for +15V/-15V/+5V Output voltage: 8Vrms max
(single-ended), 16Vrms max (balanced) Output power: 4Wrms p.c. @ 8 OhmsInput
impedance: 40kOhms Gain: 12dB (single-ended) / 18dB (balanced) Input sensitivity:
2Vrms in for max output Frequency response: 3Hz-80kHz (+0/-0.5dB) SNR: 120dB
(8Vrms out, 1kHz, A-weighted) THD+N: 0.003% (2Vrms out, 1kHz) Volume range: 0 to
-78dB plus total mute (1 dB steps) Muting: -20dB Balance range: +/-6dB (1dB
steps) Auto switch-off; disabled, 0 to 240 minutes (30 minutes steps) Supply:
15VDC Power consumption: 30VA Size: 200x200x50mm (w x d x h) Weight: 2kg
Legenda istruzioni
Clicca
per qui per vedere : FOTO PRODOTTO
 Clicca
per qui per vedere : ISTRUZIONI PRODOTTO
Clicca
per qui per vedere : CATALOGO,PROVA RIVISTE SPECIALIZZATE PRODOTTO
Nota
bene *
Per ordinare o avere
gli ultimi prezzi aggiornati telefona al
0174 670100
o invia un E-mail a
info@newaudio.it
*I prezzi indicati
sono di listino ufficiale delle case produttrici ,nel
caso di diffusori si riferisce al prezzo del
singolo diffusore per offerte ed eventuali
promozioni telefonare o inviare e-mail.
*Il
presente listino sostituisce ed annulla ogni precedente. Le caratteristiche e i
prezzi indicati possono variare senza preavviso telefonare o inviare un
e-mail per ulteriori domande e conferme sui prezzi sopra riportati.
*Tutti i marchi citati nel presente listino sono di proprietà e
registrati alle rispettive Case Produttrici
*Prezzi
franco
nostro magazzino
|
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
/JOPLIN%20(1).jpg){kind=small}
/JOPLIN%20(3).jpg){kind=small}
/JOPLIN%20(4).jpg){kind=small}
/JOPLIN%20(5).jpg){kind=small}