PROMOZIONI

Promozioni prodotti nuovi con garanzia 2 anni nel caso dei diffusori i prezzi si intendondo in questo caso la coppia ,imballati o solo esposti

TRIANGLE ELARA LN-01 Netto coppia €. 430,00

Diffusore da supporto Dim. (A x L x P): 291 x 165 x 135 mm, Sensibilità: 89dB, Risposta di frequenza (+/-3dBHz) 56-22 KHz, Potenza max 50W, Impedenza minima 4,5 (Ohms). Finitura: Nero Laccato, Bianco Laccato

FOCAL CHORUS 806 Netto coppia €. 590,00

Chorus 806 V Neutrale e bilanciato, il modello Chorus 806 V seduce grazie alla ricchezza dei toni medi più alti e alla velocità dei bassi. Una cassa completamente rifinita, ideale per le stanze al di sotto dei 20m2. Prestazioni ancora superiori se combinata con il modello SW 800 V. Tipo: Cassa bass reflex a colonna da ripiano 2 vie. 806 V diffusore da scaffale, 2 vie, bass reflex, 80 W
Neutral and balanced, the Chorus 806 V seduces by the richness of its upper midrangeand the speed of its bass. An entirely refi ned speaker, ideal to play in rooms under 20 m2 without any limits. And easily larger spaces if it is combined with SW 800 VType 2-way bass-reflex bookshelf loudspeaker, wall mounting Drivers 61/2" (165mm) Polyglass mid-bass 1" (25mm) TNV Al/Mg inverted dome tweeter Frequency response (+/- 3dB) 55Hz- 28kHz Low frequency point (- 6dB) 47Hz Sensitivity (2.83V/1m) 90dB Nom. impedance 8 ohms Minimum impedance (@25°C) 3.6 ohms @ 226Hz Max. power handling. 120W Power RMS 80W Crossover frequency 3kHz Dimensions (HxWxD) 153/8"x83/4"x119/16" (390x222x293mm) Net weight 18lbs (8.2kg)

GOLDENEAR AEON3 Netto coppia €. 990,00

The Aon 2 and 3 are exceptionally compact, ultra-high-performance bookshelf speakers that were originally developed for use as nearfield monitors in professional mixing applications. The design goal was to produce modestly-sized shelf or stand-mountable speakers that would achieve accurate high-definition sonic reproduction, with superb three-dimensional imaging, comparable to that achieved by GoldenEar’s award-winning Triton Two Towers. Although they don’t have quite the awe-inspiring bass of the floor-standing Tritons, great care has been taken, and extensive technology has been incorporated, to ensure that the Aons can deliver a remarkably satisfying listening experience without the need for a separate subwoofer. Both Aon models incorporate GoldenEar-designed cast-basket bass/midrange drivers with technology derived from the midrange units developed for the Tritons. In addition, they both use the same extraordinary and costly High Velocity Folded Ribbon (HVFR™) high frequency radiator used in the Tritons. Lastly, each Aon model utilizes two side-mounted planar low-frequency radiators in a dynamically balanced configuration in order to properly load the bass/midrange drivers for an open, box-less midrange, while also contributing to the Aons’ remarkably extended bass for such small enclosures. The Aons are of a truncated pyramidal construction, which results in significant performance advantages due to the non-parallel cabinet walls and the reduced baffle area around the tweeter. Aesthetically, the sleek, attractive pyramid-inspired shape combined with appealing design details including piano-gloss black end-caps, results in beautiful speakers that are both elegant and distinctive Aon 3 The compact, 14" Tall Aon 3 Bookshelf Monitor (on left in photo to right, with grille sock removed) incorporates a 7", High-Definition, Multi-Vaned Phase Plug (MVPP™), cast-basket Mid-Bass Driver, coupled to two 8" Inertially-balanced side-mounted Low Frequency Radiators and the GoldenEar High-Velocity Folded Ribbon Tweeter (HVFR™) SPECIFICATIONS Dimensions: 9" W x 11" D x 14" H. Frequency Response: 38 Hz – 35 kHz. Sensitivity: 90 dB. Nominal Impedance: Compatible with 8 ohms. Driver Complement: One 7" cast-basket bass/midrange driver, One High-Velocity Folded Ribbon (HVFR™) high-frequency radiator, Two 8" side-mounted planar low-frequency radiators. Rec. Amp: 10 – 250 Watt/channel .Price for one speaker .

B&W 705 S2 Netto coppia €. 1.870,00

Il tweeter a cupola in carbonio del 705 S2 è alloggiato in un contenitore Solid Body Tweeter-on-Top evoluto dall'ultima generazione della Serie 800 Diamond. Questo si unisce a un nuovo baffle sottilmente curvo, dotato di un nuovissimo alloggiamento "a capsula" per il woofer/midrange a cono Continuum.La Serie 700 adotta l'ultima generazione del Tweeter-on-Top Solid Body. La forma più allungata incorpora un nuovo sistema di caricamento del tweeter che produrre un suono ancora più libero e aperto alle alte frequenze. L'alloggiamento, accuratamente disaccoppiato, è fresato da un unico blocco solido di alluminio per resistere meglio alle risonanze.I tweeter a cupola in carbonio sono stati realizzati appositamente per la Serie 700. Offrono un netto miglioramento rispetto a quelli a doppia cupola in alluminio, innalzando il break-up a 47 kHz, per un'immagine precisa e dettagliata.Grazie alla sua struttura composita, il cono Continuum™ evita le brusche transizioni di comportamento che possono compromettere le prestazioni di un altoparlante convenzionale. Il risultato è un suono più aperto e neutro, che restituisce voci e strumenti con precisione e trasparenza.Diffusore bookshelf a 2 vie, bass reflex posteriore con tecnologia “Flow Port System”. Tweeter disaccoppiato e montato esternamente on-top da 25mm con cupola in carbonio e alloggiamento allungato in alluminio pieno. Midrange FST disaccoppiato da 165mm con membrana in Continuum e sospensione biometrica. 30-120W. 8 ohm. 88dB. Cabinet frontale curvato per migliorare la diffrazione. Finiture: Laccato nero con griglia nera, bianco satinato con griglia grigia o mocha con griglia nera. Cad

This uncompromising two-way speaker reveals subtle nuances in music others miss. Its high performance features include a solid body tweeter-on-top design borrowed from the 800 Series Diamond. Solid Body tweeter Milled from a solid block of aluminium, the solid body tweeter housing design creates an acoustically optimised housing for the tweeter – one that’s exceptionally inert and resistant to resonances. Carbon Dome™ tweeters are a brand new technology purpose-built for the 700 Series. Delivering a dramatic improvement on the aluminium double-dome tweeter, they raise the breakup threshold to 47kHz, for pinpoint imaging accuracy and detail. Continuum™ cone First introduced with the 800 Series Diamond, the Continuum™ cone represents the biggest step-change in midrange performance since Kevlar®. Its woven, coated material provides highly controlled break-up, resulting in a more open, neutral midrange Technical features Decoupled Carbon Dome tweeter Solid Body Tweeter on top Continuum cone bass / midrange Flowport™Description 2-way vented-box system Drive units 1x ø25mm (1 in) Decoupled Carbon Dome high-frequency 1x ø165mm (6.5 in) Continuum cone bass / midrangeFrequency range -6dB at 45Hz and 33kHz Frequency response 50Hz - 28kHz ±3dB Sensitivity 88dB spl (2.83Vrms, 1m) Harmonic distortion 2nd and 3rd harmonics (90dB, 1m)<1% 100Hz - 22kHz<0.5% 150Hz - 20kHz Nominal impedance 8Ω (minimum 3.7Ω) Recommended amplifier power 30W - 120W into 8Ω on unclipped programmeDimensions Height: 340mm (13.4 in) cabinet only 407mm (16 in) including tweeter Width: 200mm (7.8 in)Depth: 285mm (11.2 in) cabinet only 301mm (11.9 in) including grille and terminalsNet weight 9.3kg (20.5 lb) Finishes Cabinet: Rosenut Gloss Black Satin WhiteGrille: Black Grey (Satin White only)

MONITOR AUDIO STUDIO SATIN Netto coppia €. 1.450,00

DIFFUSORE DA SUPPORTO A 2 VIE CON TECNOLOGIE DESUNTE DALLA SERIE TOP DI GAMMA PLATINUM II - IMPEDENZA NOMINALE 4 OHM - SENSIBILITA` 86 DB - RISPOSTA IN FREQUENZA 48 HZ - 100 KHZ - POTENZA APPLICABILE RACCOMANDATA 40 - 100 WATT - 2 WOOFER DA 4 POLLICI RDT®II (RIGID DIAPHRAGM TECHNOLOGY 2ND GENERATION) IN SANDWICH DI MATERIALE C-CAM® (CERAMIC-COATED ALUMINIUM/MAGNESIUM), NOMEX E FIBRA DI CARBONIO - 1 TWEETER A NASTRO MPD (MICRO PLEATED DIAPHRAGM) - DOPPIA PORTA REFLEX A FERITOIA HIVE®II SUL PANNELLO POSTERIORE - ALTOPARLANTI DISPOSTI SU UNA CORNICE DI ALLUMINIO PRESSOFUSO MONTATA SUL PANNELLO FRONTALE, ANCORATI AL CABINET MEDIANTE LUNGHI BULLONI PASSANTI FISSATI SUL PANNELLO POSTERIORE - CROSSOVER CON COMPONENTI AUDIOPHILE GRADE SELEZIONATI E SENZA COMPROMESSI - CONNETTORI IN PURISSIMO RAME TORNITO DAL PIENO PLACCATI IN RODIO - COSTRUZIONE ARTIGIANALE FATTA A MANO - FINITURA SATIN BLACK (NERO SATINATO)FINITURA SATIN GREY (GRIGIO SATINATO) - FINITURA SATIN WHITE (BIANCO SATINATO)DIMENSIONI (L X A X P) 156 X 340 X 361 MM OPTIONAL - STANDDEDICATO (ACQUISTABILE SEPARATAMENTE 350,00euro

TRIANGLE EXPRIT GAYA EZ Listino ufficiale €. 1.300,00

Tre vie da pavimento. Reflex anteriore, LF: 2x133mm/2x5,25" MF: 1x133mm/1x5,25" HF: cono Titanium 1x25mm/1x1", Peso: 18,1 Kg ciascuno, Dim 962 x 168 x 276 mm, Dim con piedistallo (A x L x P): 980 x 230 x 315 mm, Sensibilità: 89,5dB, Risposta di frequenza: (+/-3dB) 47 Hz - 22 KHz, Potenza di picco: 180W, Impedenza nominale: 8 Ohms Impedenza minima: 3,3 Ohms Finitura: Noce
The Gaia Ez is a 3-way compact floorstander with three 5’’ drivers. It’s compact design (96cm x 17cm) makes it a perfect fit for all rooms. Being discrete & elegant, combined with powerful musical qualities makes the Gaia Ez the automatic choice for many of our music lovers. ,Tweeter TZ2500B with titanium dome ,Midrange driver membrane made of natural cellulose ,Woofers with fibreglass membranes ,Glass pedestal mounted with spikes or rubber pad ,Brushed Aluminium Terminal The MAGELLAN program showed the importance of how the bass driver influences the behaviour of the medium driver. We control the cone so it efficiently muffles any resonance in the «upper bass» area. Fiberglass was selected for its excellent affect on the lower midrange / higher bass. An ESPRIT Ez innovation is the overlay of textile material and fiberglass, which improves the rigidity of the membrane. The speaker is equipped with a new chassis, which quickly dissolves the heat generated by the coil, and with a double ferrite to improve sensitivity A real TRIANGLE trademark of technology and performance, the TZ2510, is the latest incarnation of a titanium dome in combination with a compression chamber. This technology provides high efficiency with low distortion and excellent directivity. Studies from the signature project helped to develop a new profile of the horn and also improved the phase plug. It reduces the directivity and provides almost the same sound level throughout the room. We have developed a compact engine with high magnetic power, by using a neodymium ring combined with an absorption chamber. The latter has been designed in view of stopping the propagation of the back sound wave and of reducing distortions. As a result, the high-pitched frequencies offer a more natural listening experience

TRIANGLE EXPRIT ANTAL EZ netto coppia €. 1.380,00

Tre vie da pavimento. Reflex anteriore, LF: 2x165mm/2x6,5" MF: 1x165mm/1x6,5" HF: cono Titanium 1x25mm/1x1", Peso: 27 Kg ciascuno, Dim (A x L x P) 1090 x 200 x 345 mm, Dim con piedistallo (A x L x P): 1115 x 300 x 400 mm, Sensibilità: 92dB, Risposta di frequenza: (+/-3dB) 40 Hz - 22 KHz, Potenza di picco: 240W, Impedenza nominale: 8 Ohms Impedenza minima: 3 Ohms Finitura: Noce

This 3-way floorstander introduces the latest triangle innovations. It is fitted with a horn-loaded tweeter, a mid range of natural cellulose and two glass fiber woofers.Made out of 100% natural cellulose paper, white membrane is used to avoid any coloration. It is combined with a small pleat peripheral suspension to increase the emissive surface area.Special attention has been paid to a number of details in the development of the midrange: the profile of the membrane, the shape of the suspension, and the new dust cap, are directly inspired from the MAGELLAN project. With the new ANTAL Ez, the mid-range driver increases to 165 mm to provide an even more open sound.The MAGELLAN program showed the importance of how the bass driver influences the behaviour of the medium driver. We control the cone so it efficiently muffles any resonance in the «upper bass» area. Fiberglass was selected for its excellent affect on the lower midrange / higher bass. An ESPRIT Ez innovation is the overlay of textile material and fiberglass, which improves the rigidity of the membrane. The speaker is equipped with a new chassis, which quickly dissolves the heat generated by the coil, and with a double ferrite to improve sensitivityA real TRIANGLE trademark of technology and performance, the TZ2510, is the latest incarnation of a titanium dome in combination with a compression chamber. This technology provides high efficiency with low distortion and excellent directivity. Studies from the signature project helped to develop a new profile of the horn and also improved the phase plug. It reduces the directivity and provides almost the same sound level throughout the room. We have developed a compact engine with high magnetic power, by using a neodymium ring combined with an absorption chamber. The latter has been designed in view of stopping the propagation of the back sound wave and of reducing distortions. As a result, the high-pitched frequencies offer a more natural listening experience.

KEF R700 netto coppia €. 2.450,00

DIFFUSORE ACUSTICO 3 VIE DA PAVIMENTO BASS REFLEX. SISTEMA UNIQ. 2 WOOFER DA 16CM. POTENZA 25- 200W. 89DB EFFICIENZA.
KEF R700 Floorstanding The KEF R700 exudes sophistication, not only in its contemporary design and use of high quality real wood and piano high gloss finishes, but in its class-leading sonic reproduction. The three-way design makes music or movie sound tracks controlled, detailed and dynamic, whilst twin 6.5-inch aluminium bass drivers deliver a fast, controlled and authoritative low end. Model R700 Design Three-way bass reflex Drive units Uni-Q driver array: HF: 25mm (1in.) vented aluminium dome MF: 125mm (5in.) aluminium Bass units: LF: 2 x 165mm (6.5in.) aluminium Frequency range (-6dB) 37Hz - 45kHz Frequency response (±3dB) 42Hz - 28kHz Crossover frequency 500Hz, 2.9kHz Amplifier requirements 25 - 200 W Sensitivity (2.83V/1m) 89dB Harmonic distortion 2nd & 3rd harmonics (90dB, 1m) <0.4% 100Hz-20kHz Maximum output 113dB Nominal impedance 8Ω (min. 3.2Ω) Weight 25.9kg (57lbs.) Dimension (H x W x D) (with grille and terminal) 1070 x 210 x 345 mm (42.1 x 8.3 x 13.6 in.) Dimension (H x W x D) (with grille, terminal & plinth) 1121 x 329 x 368 mm (44.1 x 13.0 x 14.5 in.)

MARTIN LOGAN ELETTROMOTION ESL Netto coppia €. 2.700,00

Ibridi Serie ElectroMotion Diffusore elettrostatico/ibrido da pavimento a 3 vie, bass reflex a pavimento, woofer con cono in carta/fibra trattata da 203mm, midrange/tweeter a nastro elettrostatico curvilineo a dispersione controllata CLS XStat™ da 860x220mm. Potenza 20-300W. Efficienza 91dB. Impedenza 6 ohm. Crossover cablato in aria Vojtko™. Punte di disaccoppiamento ETCTM in dotazione. Finitura Matt Black sia del cabinet sezione bassi che del pannello elettrostatico.

The ElectroMotion ESL (EM-ESL) represents a brave new direction for electrostatic loudspeaker design. Featuring a full-sized 34-inch tall curvilinear XStat™ electrostatic transducer the new ESL performs more like a mini-flagship than an entry level audiophile speaker. Long time MartinLogan enthusiasts are sure to describe ElectroMotion ESL as the second-coming of the legendary Aerius electrostatic speaker which debuted in 1992 and went on to sell in record numbers. The new ESL, however, boasts 40 percent more radiating surface, a superbly integrated and authoritative bass performance, and a sensitivity rated at 91dB. In addition, the ESL is capable of being effortlessly powered by both receivers and high-end amplifiers alike. ElectroMotion ESL's XStat electrostatic MicroPerf panel is housed within a radical aluminum and composite AirFrame™ similar to those found on MartinLogan's flagship products. AirFrame technology rigidifies the electrostatic panel without obstructing playable surface area or interfering with ambience enriching dipole sound radiation. At the same time, an AirFrame provides electrical and acoustical isolation, minimizing intermodulated distortion caused by vibration and resonance while enhancing imaging, low-level sonic detail, accuracy, and efficiency. MicroPerf design optimizes the individual holes of The EM-ESL's electrostatic panel. MicroPerf design substantially increases diaphragm radiating area, compared to early generations—without compromising structural integrity. The resulting increase in output capability and efficiency allows The EM-ESL's panel to enjoy a substantial leap in bandwidth and dynamics without growing larger. For example

MARTIN LOGAN CLASSIC ESL9A Netto coppia €. 7.500,00

Diffusore elettrostatico/ibrido da pavimento a 3 vie, bass reflex posteriore, doppio woofer con cono in alluminio da 203mm, midrange/tweeter a nastro elettrostatico curvilineo a dispersione controllata CLS XStat™ da 1120x234mm. Unione del pannello elettrostatico al modulo dei bassi con tecnologia AirFrame Blade Design ultra rigida. Potenza 50-400W. Efficienza 90dB. Impedenza 4 ohm. Crossover cablato in aria Vojtko™. Connettori bi-wiring. Punte di disaccoppiamento ETCTM in dotazione.Pannello elettrostatico sempre Matt Black. COLORI : Gloss Black Dark Cherry Walnut

A masterpiece doesn’t just inspire emotions. It changes the way you feel, and it sticks with you long after you’ve left the art gallery or the concert hall. It’s considered a masterpiece precisely because of its ability to alter something inside you. Once you experience it, you’ll never be the same. Enjoying a masterpiece in your own home is something to aspire to. Consider the Classic ESL 9 your ticket to a life-changing experience with a masterpiece of audio performance. You will never be the same.A Classic Masterpiece of Sound Reproduction MartinLogan unveils the Classic ESL 9, its newest modern Masterpiece. All the familiar elements of MartinLogan’s flagship ESL series are here, with some revolutionary refinements. The heart of this exceptional loudspeaker is its 9.2-inch-wide Curvilinear Line Source (CLS) XStat vacuum-bonded electrostatic transducer. Advanced MicroPerf stator technology reveals more of the diaphragm surface area than any other electrostatic panel in this size class, efficiently increasing the narrow panel’s output. Ultra-rigid AirFrame Blade construction reduces performance-robbing vibrations, its shape creating an expressive alignment with the woofer cabinet. Deep bass is rendered with unflinching accuracy and authority by dual 8-inch low-distortion, high-excursion aluminum cone woofers in a beautifully sculpted enclosure. Classic Elements, Experienced In a New Way: Advanced MicroPerf stator technology, which allows for almost twice the exposed electrostatic diaphragm surface as a traditional electrostatic panel of the same size. A reinforced electrostatic panel with rigid ClearSpar™ spacers, keeping an exact level of tension on the vacuum-bonded diaphragm without obscuring the beautiful see-through design. Add to these the slender, pointed-arrow design of the new AirFrame™ Blade construction and the result is a powerfully evocative composition creating a harmonious connection between the panel and its woofer cabinet. Now notice some refinements: We have reinvented the Classic ESL 9 woofer section. We use two 8-inch laser-engineered low-distortion aluminum cone woofers, balanced in an opposing array, one forward- and one rear-firing. This design greatly reduces cabinet vibrations inherent in same-direction woofer positioning, specifically in the 34Hz to 100Hz range for uniform frequency response resulting in realistic bass effects you can feel. New Ultra-Rigid AirFrame Blade Design Classic ESL 9 XStat panels are joined to their speaker cabinets using MartinLogan’s redesigned AirFrame Blade construction, precision manufactured from an aerospace-grade extruded aluminum alloy. This material, and this exclusive manufacturing process, makes the panels extremely rigid. The bold, forward-moving styling of this AirFrame Blade rail system, narrow and strong in front, broad and forceful from the side, is a modern design statement. It never obstructs playable surface area or interferes with the panel’s dipole sound radiation pattern. It also provides electrical and acoustical isolation, minimizing intermodulation distortion caused by vibration and resonance. The flowing lines emphasize the groundbreaking integration of the panel itself with the compact woofer and amplifier section. The breathtaking AirFrame Blade design enhances imaging, low-level sonic detail, accuracy, and speaker efficiency.Curvilinear Line Source (CLS) Electrostatic Panel CLS technology is an essential ingredient of every electrostatic loudspeaker we produce. Through our proprietary manufacturing method, we have built-in the panel’s gentle horizontal curvature. This unique design enhances the high frequency detail produced by the large radiating surface, without compromising overall sound quality. Notice how the gentle modern curve and perforation pattern gives way to the flat grille of the woofer section. Controlled Dispersion Sound Radiation The sound we hear from a loudspeaker is a combination of direct radiation from it to our ears, and reflections off of room surfaces—walls, floor, and ceiling. How our brains integrate this information is far from simple. Depending on the angle of incidence to the ears and the arrival-time difference between direct and reflected sound, reflections can either blur detail and stereo imaging, or enhance the natural impression of depth and openness. Electrostatic panels, which are true dipole speakers, produce a nearly-ideal controlled dispersion radiation pattern. They send very little sound to the sides, thereby minimizing side-wall reflections, whose short arrival times tend to interfere with the perception of the direct sound. Their strong rear radiation, however, produces a generous amount of natural, ambience-enriching later-arriving mid- and upper register information. Big, Well-Blended Bass Performance Rounding out the dynamic performance of this Masterpiece is a passive pair of high-excursion 8-inch laser-engineered aluminum cone woofers custom designed by MartinLogan’s in-house engineering team. This efficient, cast basket woofer design improves cone suspension and the magnetic flux field, maximizing response time, to produce truly profound bass output (down to 34Hz) with vanishingly low distortion. The woofers are balanced in an opposing array, one forward- and one rear-firing. This design greatly reduces cabinet vibrations inherent in same-direction woofer positioning, specifically in the 34Hz to 100Hz range. Roll-off characteristics for this opposing woofer array are further optimized for a realistically coherent bass wave form. In addition, we’ve tuned the rear-firing woofer to minimize near-wall interactions, perfectly complementing the dipole nature of the electrostatic panel. Bass performance from this configuration is accurate, musical and utterly lifelike. A flared, ultra-low turbulence rear-firing slotted bass port is integral to the design of the enclosure, providing an extra layer of rigid internal bracing and increasing deep bass output with no added port noise. Bi-wirable Tool-less Binding Posts and Low-Voltage Power Supply MartinLogan's proprietary tool-less binding posts simplify cable connection and management. Two sets are supplied—one connected to the electrostatic panel and the other feeding the woofer. Listeners can choose to vertically/horizontally bi-amp the Classic ESL 9, or use jumper clips between the binding post sets for a single wire-connection. Classic ESL 9 features bi-wirable binding posts and provide the ultimate level of flexibility for connection and setup. To further simplify setup and cable management, Classic ESL 9 features a low-voltage DC power supply eliminates the need for a traditional, heavy IEC power cord. Precision-Built Advanced-Topology Vojtko Crossover Control is key in the production of a Masterpiece. (Just ask Michelangelo.) Control in the Classic ESL 9 is provided by the advanced Vojtko-voiced crossover. Carefully hand-built using only the finest metallized film capacitors, air-core coils, and low DCR steel laminate coils, the crossover employs MartinLogan’s proprietary Vojtko topology for vanishingly low distortion and seamless driver/ESL integration. This precision-tuned network excels at preserving and reproducing even the most microscopic sonic nuances, while ably handling the full dynamics of any source. The Classic ESL 9 is engineered to work well with practically any type of electronics. MartinLogan’s state-of-the-art electrical interface engineering ensures an absolutely transparent link from your amplifier to the electrostatic panel and woofer array. This produces sound of unparalleled purity, precision, clarity, and openness. Like all of the loudspeakers in the Masterpiece Series, and like any true masterpiece, when you experience the realistically transparent performance of the Classic ESL 9, you will be changed by it.

B&W 603 s2 ANNIVERSARY * Netto coppia €. 1.550,00

Diffusore da pavimento a 3 vie. Edizione speciale che celebra i 25 anni della serie 600. Bass reflex posteriore Flowport, 2 woofer con cono in carta/kevlar da 165mm, midrange FST in Continuum da 150mm, tweeter a doppia cupola in alluminio disaccoppiato da 25mm con caricamento a condotto Nautilus e con l'incisione dell'anniversario sul bordo della griglia. Filtro crossover riprogettato con componenti di pregio come i condensatori Mundorf. Potenza 30-200W. Predisposta per bi-wiring. Finiture: Nero opaco (Matt Black) con griglia nera, Bianco opaco (Matt White) con griglia grigia o Quercia (Oak) con griglia grigia . Cad.

B&W 804 D4 Netto coppia €. 11.900,00

Un progetto completamente nuovo per prestazioni assolute con una estetica mozzafiato. Tutto sembrava detto con la Serie D3, ma la Bowers & Wilkins, negli oltre suoi 50 anni di esperienza, a partire dalle prime realizzazioni di John Bowers, ha sempre stupito, anche quando qualsiasi miglioramento sembrava impossibile. La nuova Serie 800 D4, 4a generazione della gamma di diffusori di punta dell’azienda inglese, è riuscita a fare un ulteriore, significativo, passo in avanti rispetto alla D3 che manda in pensione, migliorando ancora quello che appariva come impossibile da migliorare. Non solo un'altra gamma di diffusori, quindi, ma un nuovo punto di riferimento, come, del resto, è sempre successo nella storia della Serie 800. Le innovazioni sono talmente tante in questa nuova D4 da non poter parlare di restyling, ma di un progetto completamente nuovo, con sostanziali migliorie che stravolgono, letteralmente, le già eccellenti prestazioni della passata D3. Colpisce, immediatamente, il design, che seppure simile nei tratti stilistici al precedente, tradisce senza alcun dubbio le novità tecniche, a partire dal corpo del tweeter Solid Body comune a tutti i diffusori, adesso molto più allungato, e poi la parte superiore dei cabinet con una linea distintiva in alluminio, che nasconde un nuovo rinforzo del mobile in tecnologia Reverse Wrap adesso adottato anche dai modelli di ingresso 804 D4 e 805 D4 e che fa da appoggio alla nuova finitura in pelle Connoly.•Sistema: 3 vie 4 altoparlanti •Driver: 1 tw da 2,5 cm, 1 mid-range da 13cm, 2 woofer da 16,5cm •Gamma di frequenza: 20 Hz-35 kHz •Risposta in frequenza (+/- 3 dB): 24Hz-28 kHz •Sensibilità: 89 dB •Distorsione armonica (89dB, 1mt in asse): <0,3% •Impedenza: 8 ohm •Potenza raccomandata: 50W-200W •Dimensioni: 1071x306x391mm •Peso: 36,8 kg

MONITOR AUDIO BRONZE 5 Netto coppia €. 699,00

Diffusore da pavimento a 2 vie e 1/2 - sistema reflex a doppia camera interna con due porte, una posteriore e una anteriore, con tecnologia hive ii - 1 woofer c-cam® da 14 cm - 1 mid-range c-cam® da 14 cm - 1 tweeter gold dome c-cam® da 25 mm - crossover con componenti audiophile grade selezionati - cabinet rinforzato con sistema di fissaggio altoparlanti a vite passante - risposta in frequenza 37 hz-30 khz - efficienza 90 db/w/m - impedenza nominale 8 ohm - potenza consigliata compresa tra 30-120 watt rms - griglia magnetica con attacchi invisibili - doppia coppia di terminali per bi-amping o bi-wiring - dimensioni (base, punte, griglie e connettori compresi) 898 x 215 x 282 mm (axlxp) - peso 11 kg.*

The new Bronze 5 has put some distance between it and the BX5 with a stunning first-test result in Hi-Fi Choice mag. Following the excellent five-star review for the Bronze 2 in What Hi-Fi? Sound & Vision, David Vivian’s experience clearly reveals the audiophile nature and astonishing value offered by the new Bronze series. Awarding a Hi-Fi Choice recommended badge and a maximum five stars for sound quality, value, ease of drive and overall, he says “…Bronze 5 doesn’t come across like an incremental evolution of the BX5. Instead, it looks and sounds as if it should cost at least £1,000…straight away I’m hooked by the bijou tower’s powers of resolution and capacity to dig deep into a recording. The inner detail it captures can sometimes seem mesmerising…That such compelling clarity, grip, dynamics and enormous musical insight can be experienced from a slim box at a beer budget price is a powerful statement.”Its 51/2" C-CAM bass driver and 51/2" C-CAM bass/mid driver are arranged in a two and half way system configuration, operating in separate acoustic chambers with front and rear firing HiVe II ports to provide differential tuning for higher efficiency and greater low frequency extension. The Bronze 5's low-distortion architecture expertly combines clean, expressive mid and high frequencies with punchy room-filling bass lines delivering a naturally rhythmic and addictive blend of large-scale dynamics and detail from a surprisingly unobtrusive tower.Technology C-CAM Gold Dome tweeter Twin 51/2" C-CAM bass and mid-range drivers Single bolt-through driver systems for increased overall bracing, rigidity and driver/baffle de-coupling HiVe II port technology High quality crossovers with premium grade Polypropylene film capacitors used throughout Rigid 18 mm MDF construction throughout, employing radial and cross-bracing techniques for high rigidity resulting in low cabinet coloration Floor-level terminal panel for easy termination and neat cable access. Bi-wire/ Bi-amp terminal configuration Premium quality vinyl veneer finishes System Format 2-1/2 Way Frequency Response 37 Hz — 30 kHz Sensitivity (1W@1M) 90 dB Nominal Impedance 8 ohms Maximum SPL 113.8 dBA (pair) Power Handling (RMS) 120 W Recommended Amplifier Requirements 30 — 120 W Cabinet Design Dual chamber bass reflex – Ported front and rear HiVe II Port technology Crossover Frequency LF: -6 dB @ 600 Hz MF/HF: 2.8 kHz Drive Unit Complement 1 x 51/2" C-CAM bass 1 x 51/2" C-CAM bass mid-range driver 1 x 25 mm C-CAM Gold Dome tweeter Cabinet Dimensions (H x W x D) 850 x 165 x 248 mm (337/16 x 61/2 x 93/4") Dimensions (Including Grille, Terminals, Plinths and Spikes (H x W x D)) 898 x 215 x 282 mm (355/8 x 87/16 x 111/8") Weight (each) 11 kg (24 lb 6 oz)

MONITOR AUDIO SILVER 200 Netto coppia €. 1.390,00

DIFFUSORE DA PAVIMENTO A 2 VIE E MEZZO - REFLEX POSTERIORE CON TECNOLOGIA HIVE II - 1X MIDWOOFER E 1X WOOFER C-CAM® CON PROFILO RST DA 135 MM - 1X TWEETER A CUPOLA GOLD DOME C-CAM® DA 25 MM - CROSSOVER CON COMPONENTI AUDIOPHILE GRADE SELEZIONATI - CABINET RINFORZATO CON SISTEMA DI FISSAGGIO ALTOPARLANTI A VITE PASSANTE, DOTATO DI CAMERE INDIVIDUALI PER MIDWOOFER E WOOFER IN FUSIONE DI POLIMERI - RISPOSTA IN FREQUENZA 38 HZ - 35 KHZ - EFFICIENZA 89 DB/W/M - IMPEDENZA NOMINALE 8 OHM - POTENZA CONSIGLIATA AMPLIFICATORE COMPRESA TRA 60 E 150 WATT RMS - GRIGLIA MAGNETICA CON ATTACCHI INVISIBILI - DOPPIA COPPIA DI TERMINALI PER BI-AMPING O BI-WIRING - BASE A BILANCIERE CON PUNTE E SOTTOPUNTE - DIMENSIONI (GRIGLIA E CONNETTORI COMPRESI) 165 X 885 X 269 MM (L X A X P) - PESO 14,6 KG -

A pair of Monitor Audio’s unique 5¼-inch C-CAM RST bass drivers share the duties of delivering bass and mid/bass. Configured as a two-and-a-half way system both electrically and acoustically, you will be amazed at the magical sound quality that this slimline can produce in your home. The two bass drivers operate in separate acoustic chambers within the enclosure to provide differential tuning and are divided optimally with crossovers to ensure both bass drivers contribute to the lower frequencies. This ensures only the mid-range crosses over with the tweeter and results in a consistent and precise image, on and off axis. This configuration delivers performance approaching a three-way design whilst ensuring higher efficiency and extended low frequency, yet in a smaller cabinet.The drive units are constructed with massive magnetic systems capable of deep bass extension. The low-frequency response has been engineered to provide smooth roll-off without exhibiting any of the usual ‘overhang’, meaning that the Silver 200 can be sited close to a wall and provide the ideal blend of domesticity and blazing performance. Diminutive for a floorstander, this model is no slouch. The Silver 200 is a serious audiophile speaker with amazing drive and incredible musicality. The engineering challenge was to create a smaller box with bigger sound; with the Silver 200, Monitor Audio achieves that goal so that you can enjoy your music and films with convincing realism. This product is now available to use with home theatre design software, The Cinema Designer. Read more. TechnologyTwo-and-a-half-way, three-driver configuration Differentially-tuned acoustic system means high efficiency with powerful low-frequency extension New 25 mm C-CAM, (Ceramic-Coated Aluminium/Magnesium) tweeter featuring vented Neo magnet system optimised for lower distortion and cleaner sounding highs New 5¼-inch bass and 5¼-inch bass/mid drivers with ‘dished’ C-CAM cone profile for better damping and improved mid-range clarity RST Cone profile for improved diaphragm rigidity and lower distortion Unique-build ring/voice coil-cone coupling mechanism (DCF) optimised to reduce high-frequency cone break-up and increasing the critical voice coil circumferential rigidity

MONITOR AUDIO SILVER 6 Netto coppia €. 1.250,00

DIFFUSORE DA PAVIMENTO A DUE VIE E MEZZO - SISTEMA A DOPPIA CAMERA CON DOPPIO REFLEX ANTERIORE E POSTERIORE CON TECNOLOGIA HIVEII - 1 WOOFER DA 16 CM IN RTS - 1 MIDWOOFER DA 16 CM IN RTS 1 TWEETER DA 25 MM GOLD DOME C-CAM - RISPOSTA IN FREQUENZA 35-35.000 HZ - SENSIBILITA` 90 DB/W/M - IMPEDENZA NOMINALE 8 OHMS - POTENZA APPLICABILE CONSIGLIATA COMPRESA TRA 60-150 W RMS - CABLAGGIO IN RAME ARGENTATO OFC E CROSSOVER CON COMPONENTISTICA AUDIOPHILE GRADE - FINITURA IN VERO LEGNO DI NOCE - DIMENSIONI 936 X 245 X 300 - PESO KG. 16

The Silver 6 incorporates a 6” C-CAM® RST® bass driver and 6” C-CAM RST bass/mid driver in a 2.5 way system configuration. The drivers are housed in separate acoustic chambers within the enclosure design to provide differential tuning for higher efficiency and enhanced low frequency extension. Excellent dynamics combined with a naturally rhythmic sonic character and tight, controlled bass make the Silver 6 an outstanding communicator of music and film audio in medium to large rooms - System Format 2 1/2-Way Frequency Response 35Hz - 35kHz Sensitivity (1W@1M) 90dB Nominal Impedance 8 Ohms Maximum SPL (dBA) 115.5 (pair) Power Handling (RMS) 150W Recommended Amplifier Requirements (RMS) 60-150W Bass Alignment Dual Chamber, Bass reflex with differential tuning. Twin HiVe®II port System Crossover Frequency LF: 700Hz MF/HF: 2.7kHz Drive Unit Complement 1 x 6" RST® Bass driver. 1 x 6" RST Bass/Mid driver. 1 x 1" (25mm) C-CAM® gold dome tweeter Cabinet Dimensions excluding Grille, Terminals and Plinth: (H x W x D) 885 x 185 x 240 mm (34 13/16 x 7 5/16 x 9 7/16 inch) External Dimensions including Terminals: (HxWxD) 885 x 185 x 263 mm (34 13/16 x 7 5/16 x 10 3/8 inch) External Dimensions including Grille & Terminals: (HxWxD) 885 x 185 x 275 mm (3413/16 x 75/16 x 1013/16 inch) External Dimensions including Plinth & Feet: (HxWxD) 936 x 245 x 300 mm (367/8 x 95/8 x 1113/16 inch) Individual Weight 16.5 Kg (40 lb 8 oz)

MONITOR AUDIO GOLD 200 Netto coppia €. 3.800,00

DIFFUSORE DA PAVIMENTO BASS REFLEX A 3 VIE CON TECNOLOGIE DESUNTE DALLA SERIE TOP DI GAMMA PLATINUM II - IMPEDENZA NOMINALE 4 OHM - SENSIBILITA` 88 DB - RISPOSTA IN FREQUENZA 35 HZ - 50 KHZ (-6 DB) - POTENZA APPLICABILE RACCOMANDATA 80 - 200 WATT - 2X WOOFER DA 6,5 POLLICI RDT®II (RIGID DIAPHRAGM TECHNOLOGY 2ND GENERATION) IN SANDWICH DI MATERIALE C-CAM® (CERAMIC-COATED ALUMINIUM/MAGNESIUM), NOMEX E FIBRA DI CARBONIO, DOTATI DI MECCANISMO PROPRIETARIO DCF (DYNAMIC COUPLING FILTER) - MID-RANGE C-CAM® DA 2,5 POLLICI - TWEETER A NASTRO MPD (MICRO PLEATED DIAPHRAGM) - DOPPIA PORTA REFLEX HIVE®II SUL PANNELLO POSTERIORE - CABINET ACCURATAMENTE RINFORZATO E SMORZATO INTERNAMENTE - ALTOPARLANTI DISACCOPPIATI DAL PANNELLO FRONTALE E ANCORATI AL CABINET MEDIANTE UN LUNGO BULLONE PASSANTE FISSATO SUL PANNELLO POSTERIORE - CROSSOVER CON COMPONENTI AUDIOPHILE GRADE SELEZIONATI - CABLAGGIO PUREFLOW IN RAME OFC PLACCATO ARGENTO - CONNETTORI PROPRIETARI PREDISPOSTI PER BI-AMPING E BI-WIRING - GRIGLIA MAGNETICA - BASE IN METALLO CON PIEDINI IN GOMMA REGOLABILI E PUNTE CONICHE RIMOVIBILI PER ADATTARSI A DIFFERENTI TIPOLOGIE DI PAVIMENTO - FINITURA PIANO GLOSS BLACK (NERO LACCATO) CON TOP RIVESTITO IN LUSSUOSO MATERIALE SOFT TOUCH NERO - DIMENSIONI BASE INCLUSA (L X A X P) 283 X 997 X 388 MM - PESO 21,9 KG

PMC twenty 2.23 Netto coppia €. 2.200,00

Sicuramente la prima e travolgente impressione dei ventitré 23 anni è un altoparlante aperto, coinvolgente e comunicativo. Le sue dimensioni sfidano sia la profondità dei bassi che la scala di presentazione prendendo qualsiasi materiale musicale o cinematografico nel suo passo. Il suono è vivido e dinamico e fornito con bassi autorevoli. Chiudi gli occhi e la loro posizione si dissolve. Twenty.23 è il più compatto della gamma da pavimento della serie Twenty. Il Twenty.23 offre un suono sorprendente che riempie la stanza con immagini accurate. A soli 923 mm di altezza, il venti.23 si integra facilmente in ambienti compatti Gamma di potenza 60-250w. Driver 27 mm SONOLEX HF, PMC M13 140mm (5/1/4 ") LF opaco leggero drogato. Peso 13,2 Kg. H923mm x L152mm x P330mm. Finitura disponibile: Amarone

Certainly the first and overwhelming impression of the twenty•23 is an open, engaging and communicative loudspeaker. Its size defies both the depth of bass and scale of presentation by taking any music or film material in its stride. The sound is vivid and dynamic and delivered with authoritative bass. Close your eyes and their location dissolves.Twenty.23 is the most compact of the twenty series floor standing range. The twenty.23 offers astounding room filling sound with accurate imaging. At only 923mm hight the twenty.23 blends effortlesly into compact environments Power range 60-250w. Drivers 27 mm SONOLEX HF, PMC M13 140mm (5/1/4")LF matt lightweight. doped. Weight 13.2 Kgs. H923mm x W152mm x D330mm. Available finish: Amarone

VIENNA ACOUSTIC MOZART REFERENCE Netto coppia €. 3.200,00

Mozart Grand Symphony Edition It is nearly impossible to fully express the impact Wolfgang Amadeus Mozart has had on the identity of our home, Vienna. This importance is the same with us at Vienna Acoustics and the model loudspeaker, now in its third generation, which we have chosen to name for this most famous musical innovator. Taking into full account the importance Mozart represents, we have recreated the Mozart Grand with refinements effecting virtually all critical components. One area we will not change is how and where we build each piece. For more than twenty years each loudspeaker we create is hand crafted in Vienna, Austria with only the finest components and expertly crafted, custom cabinetry. Beginning with our longstanding belief that the foundation of a proper loudspeaker design lies within the quality of its drivers, we have worked extensively on building tighter and tighter tolerance drive units. It is with this constant improvement in our driver production and testing that we found the first ways of making improvements to this model. In addition to these difficult improvements in driver production, we have replaced the second woofer with our patented Spider-Cone™ woofer. As with all our models, we decided to continue researching ways of improving the crossover as well. The final sonic improvements as a result of these collective changes are greater clarity, speed as well as greater bass extension without giving up any of the famed musical quality and rhythm inherent in all our designs. The final reward for this painstaking effort is presented here in our Mozart Grand Symphony Edition, beautifully finished with selected real wood veneers, as well as with true piano lacquer. Impedance 4 Ohms Frequency response 30Hz – 22kHzSensitivity 90 dBRecommended Amplifier 30 – 200 WattsTweeter 1.1” Hand Coated VA Silk DomeMid-Woofers (1) 6” X3P, (2) 6” Spider-Cone™ X3PBass FunctionImpulse Optimizing QB 3 (Quasi-Butterworth) Bass System Bass Reflex Crossover System Two and a Half Way Crossover Components MKP Capacitor 1% Tolerance Coils 0.7% tol., Air Coils Metal Film Resistors 1% Inductance Free Weight per Pair 116lbs/52.6kg Dimensions (W x H x D) inches 8.5” x 38.25” 13.5” mm 216mm x 972mm x 343mm Finishes Cherry, Premium Rosewood, Piano Black and Piano White .Price for one speaker .

Proac STUDIO SM115 Netto coppia €. 2.200,00

Il progettista Stewart Tyler rinnova la gamma dei diffusori della serie Studio dando vita al diffusore ProAc Studio 115, il successore di Studio 110, uno dei diffusori ProAc di maggior successo.Seguendo le orme del predecessore, il nuovo diffusore Studio 115 si presenta come un diffusore compatto dalle prestazioni elevatissime, con un rapporto qualità prezzo che lo pone seriamente in rilievo sull'offerta di mercato, e dotato del caratteristico suono ProAc presente in ogni diffusore creato dalla mente del progettista inglese.Studio 115 rivede completamente la componentistica; il nuovo mid-woofer è il medesimo altoparlante da 165mm utilizzato nei diffusori da pavimento ProAc Studio 140 MkII, il tweeter è un nuovissimo progetto ProAc a cupola morbida da 20mm. Il mobile del diffusore è stato snellito e acquisisce ulteriore rigidità per ridurre le riflessioni del frontale, e presenta il condotto del tubo d'accordo posizionato centralmente per ottimizzare l'emissione delle basse frequenze. Il crossover è un progetto ex novo che impiega esclusivamente componenti di prim'ordine. I morsetti sui terminali sono ora i medesimi impiegati sulla serie superiore Response. Studio 115 Diffusore bass reflex da scaffale/stand a 2 vie, 15-150 watt, 8 ohm, 30hz-30khz, 88,5dB, bi-wired, magneti schermati. Dimensioni (LxAxP): 190x380x240 mm. cadauna Peso: 8,9 kg. colore nero

ProAc proudly announce the launch of the Studio 115 all new compact monitor. The cabinet, drive units, crossover and terminals have all been upgraded from the previous model, the Studio 110 and a narrower cabinet front baffle has been utilised to aid dispersion and produce a bigger soundstage. The cabinet features bitumous damping and the port tube for bass loading is now centrally located on the front baffle with the new bass driver. The new bass driver is manufactured from carbon filled polyproalene; A material which gives all the inherent advantages of cone stiffness such as a lucid bass quality and natural, detailed presentation. It is also an ideal material with which to minimise distortion characteristics and has contributed significantly to the success of the Studio 140 Mk 2. The bass driver crosses over to a brand new tweeter developed by ProAc which has a special dome with air-cooling. The crossover network components have been upgraded to seamlessly integrate the new drivers.The Studio 115 is designed to work with all levels of quality equipment, from a modest set-up to a true high-end system, producing highly musical results in the true ProAc compact monitor tradition.