cavo per diffusori entry-level a 42 fili in rame, costruzione "figura 8" che consente un facile impiego nelle installazioni in spazi ridotti Optional : Connettori  a  banana  +33,00 euro confezione 4 pezzi-connettori a forcella  +  33,00  euro  confezione 4 pezzi

cavo per diffusori entry-level a 79 fili in rame, costruzione "figura 8" che consente un facile impiego nelle installazioni in spazi ridotti, migliora la riposta dei bassi e sulle alte frequenzeOptional : Connettori  a  banana  +33,00 euro confezione 4 pezzi-connettori a forcella  +  33,00  euro  confezione 4 pezzi

PERFORMANCE  MICRO (QM/200) cavo per diffusori Micro, configurazione a figura 8, ideale per  installazioni home cinema e per diffusore da scaffale Optional : Connettori  a  banana  +33,00 euro confezione 4 pezzi-connettori a forcella  +  33,00  euro  confezione 4 pezzi

This award winning Performance Micro cable brings you a miniature sized discreet cable that does not compromise on quality  Performance Micro uses a miniature figure ‘8’ construction which allows it to be used in the most demanding situations. This cable features advanced materials to enable top quality sound in a discreet cable that can be hidden behind skirting boards or under carpets FEATURES AND BENEFITS High Performance Low Density  Polyethylene Dielectric Cuts down on the amount of audio signal energy lost due to cable capacitance  Miniature figure ‘8’ configuration Enables Micro to be used in the most demanding of discreet set ups without sacrificing quality Ideal for use in Home Cinema or bookshelf speaker installations The cable can follow the contours of the room and remain in place 99.999% OFC conductors Provides a low resistance pathway for the audio signal and delivers stunning high frequency detail  Specifications Wire gauge - 17 AWG Jacket OD - 2.40mm Cross-sectional area - 1.25mm² Loop resistance - 0.0290 Ω/m Capacitance - 25pF/m Inductance - 0.63 µH/m Dissipation factor

PERFORMANCE SILVER MICRO (QSM/100) cavo per diffusori Micro con guaina in argento, ideale per installazioni home cinema e per diffusore da scaffale-Optional : Connettori  a  banana  +33,00 euro confezione 4 pezzi-connettori a forcella  +  33,00  euro  confezione 4 pezzi

PERFORMANCE ORIGINAL (QO/100W) cavo per diffusori Original, dielettrico in polietilene a bassa densità ed elevate prestazioni . Optional : Connettori  a  banana  +33,00 euro confezione 4 pezzi-connettori a forcella  +  33,00  euro  confezione 4 pezzi

La nuova bobina di cavo per diffusori QED, QED XT25, utilizza la geometria X-Tube™ modificata in modo da garantire prestazioni ancora migliori. Il nuovo cavo di riferimento per diffusori di fascia media.Optional : Connettori  a  banana  +33,00 euro confezione 4 pezzi-connettori a forcella  +  33,00  euro  confezione 4 pezzi

cavo per diffusori che combina la caratteristiche uniche del  precedente Silver Anniversary alle migliorie della tecnologia XTUBE, conduttori OFC Optional : Connettori  a  banana  +33,00 euro confezione 4 pezzi-connettori a forcella  +  33,00  euro  confezione 4 pezzi

cavo per diffusori che combina la caratteristiche uniche del precedente Silver Anniversary alle migliorie della tecnologia XTUBE TM, conduttori Silver Plated Optional : Connettori  a  banana  +33,00 euro confezione 4 pezzi-connettori a forcella  +  33,00  euro  confezione 4 pezzi

cavo per diffusori, versone miniaturizzata dal modello top di gamma Genesis, con dielettrici in Teflon x basse impedenze, dieci conduttori centrali placcati argento e tecnolgia Aircore TM 50mt 702,85 1mt 25,95 Optional : Connettori  a  banana  +33,00 euro confezione 4 pezzi-connettori a forcella  +  33,00  euro  confezione 4 pezzi

QUED GENESIS  SILVER SPIRAL                                 Listino  ufficiale  €.  58,72 

la bassissima resistenza del cavo Silver Spiral consente agli amplificatori di esercitare il massimo controllo sui diffusori che pilotano soprattutto alle basse frequenze, un vero componente highend, geometria a tripla spirale concentrica, tecnologia a schermatura concentrica, tecnologia Aircore TM Optional : Connettori  a  banana  +33,00 euro confezione 4 pezzi-connettori a forcella  +  33,00  euro  confezione 4 pezzi

cavo per diffusori PRETERMINATO, utilizza la geometria XTube ™ modificata in modo da garantire prestazioni ancora migliori. Il nuovo cavo di riferimento per diffusori di fascia media.

cavo per diffusori PRETERMINATO, cavo che combina la caratteristiche uniche del precedente Silver Anniversary alle migliorie della tecnologia X-TUBETM, conduttori Silver Plated

cavo per diffusori PRETERMINATO che combina la caratteristiche uniche del precedente Silver Anniversary alle migliorie della tecnologia X-TUBE, conduttori OFC

XT40i celebrates QED's 40 years of award winning British heritage. Winner of 'Best speaker cable' at the 2014 What Hi-Fi? Awards. Acclaimed by What HI-FI? Magazine; this 'Five Star' award winning pure copper loudspeaker cable boasts QED's advanced X-TubeTM technology and a massive 4mm2 cross sectional area. This results in a cable that delivers clear sonic advantages over conventional cable designs by maintaining a flat frequency response within the audio band. We are so confident about the performance of the new XT40, we urge enthusiasts to audition and compare it, not only to their favourite cable but also to alternative models at any price. Prepare to be surprised!FEATURES AND BENEFITS X-TUBE™ TECHNOLOGY At low frequencies both X-TubeTM and conventional stranded/solid core speaker cables convey signals in a linear way. However, at high frequencies, X-TubeTM retains a near-linear signal transfer, whereas the conventional cable fails to conduct uniformly across the entire conductor area. The result is that X-TubeTM delivers greater detail and fidelity across the audio spectrum which would other wise be lost in ordinary cables. LARGE cross-sectional area The 4mm2 cross sectional area means XT40 exhibits very low resistance, allowing amplifiers to exert outstanding control over the speakers they are driving. In addition, its large cross sectional area makes it suitable for long cable runs. Specifications Wire gauge - 12 AWG Jacket OD - 6.00mm Cross-sectional area - 4.00mm² Loop resistance - 0.008 Ω/m Capacitance - 59pF/m Inductance - 0.46 µH/m Dissipation factor - 0.0576 Nominal outside diameter 6.0 mm For best results use QED Airloc™ Forte banana plugs.

SIGNATURE REVELATION cavo per diffusori, versone miniaturizzata dal modello top di gamma Genesis, con dielettrici in Teflon x basse impedenze, dieci conduttori centrali placcati argento e tecnolgia Aircore TM

The award winning Signature Revelation is the little brother to the flagship 'Genesis Silver Spiral' ‘Revelation’ speaker cable lives up to its name and delivers unprecedented sonic performance at a price comfortably affordable by all Hi-Fi and home cinema enthusiasts. This cable is a miniaturized version of our flagship ‘Genesis’ cable and features Teflon dielectrics to maintain its low impedance.FEATURES AND BENEFITS Aircore™ Technology QED cables above 2.5mm2 cross sectional area utilize air core technology to obviate the skin effect by bundling several separately insulated smaller cores together to make up a larger CSA. If these conductors are arranged around a hollow central core of polyethylene the self inductance exhibited by the cable can be reduced to around half that predicted by calculation Ten silver plated 99.999% oxygen free copper central conductors of 19/0.1mm Deliver incredibly low resistance and detail  Features Teflon dielectrics to maintain its low impedance Low constant dielectric materials such as Teflon have been used to cut down on the amount of audio signal energy lost due to cable capacitance Specifications Wire gauge - 16 AWG Jacket OD - 5.00mm Cross-sectional area - 1.50mm² Loop resistance - 0.020 Ω/m Capacitance - 35pF/m Inductance - 0.52 µH/m Dissipation factor - 0.0009 Recommended for high end bookshelf installations Lifetime Guarantee

cavo per diffusori PRETERMINATO, la bassissima resistenza del cavo Silver Spiral consente agli amplificatori di esercitare il massimo controllo sui diffusori che pilotano soprattutto alle basse frequenze, un vero componente highend, geometria a tripla spirale concentrica, tecnologia a schermatura concentrica, tecnologia Aircore TM

QED's flagship speaker cable. The award winning Genesis Silver Spiral cable is the result of over 40 years of scientific research and development into speaker cables Silver Spiral’s exceptionally low resistance allows amplifiers to exert outstanding grip and control over the speakers they’re driving, especially at low frequencies. This isn’t just another speaker cable it’s a high performance audio component .This cable represents the culmination of QED research and development over the past 40 years.FEATURES AND BENEFITS AIRCORE TECHNOLOGY™ QED cables above 2.5mm2 cross sectional area utilise air core technology to obviate the skin effect by bundling several separately insulated smaller cores together to make up a larger CSA. If these conductors are arranged around a hollow central core of polyethylene the self inductance exhibited by the cable can be reduced to around half that predicted by calculation. Unique triple concentric spiral geometry Concentric screen technology For interference immunity  9 bunches of silver plated 99.999% oxygen free copper conductors Deliver exceptionally low resistance Specifications Wire gauge - 10 AWG Silver plated 99.999% Oxygen Free Copper conductors Aircore™ Technology Jacket OD 16.60mm Cross-sectional area - 5.50 mm2 Loop resistance - 0.006 Ω/m Capacitance - 76 pF/m Inductance - 0.46 µH/m Dissipation factor - 0.0070 Recommended for high end installations

cavo per diffusori HIGH-END PRETERMINATO, bassissima resistenza per un mibliore controllo dei diffusori e dell'amplificatore, QED AIRCORE™ TECHNOLOGY: una geometria e costruzione uniche per il massimo dettaglio sulle alte frequenze, conduttori smaltati per massimo isolamento - ridotta capacitanza - migliore flusso di energia, connettori AIRLOC™ placcati rodio per mantenere la fedeltà del segnale audio dall'inizio alla fine

PROFILE AUDIO  cavo di interconnessione audio analogico 2 phono - 2 phono, compatto e flessibile

 1mt        28,00
 2mt        35,00
 3mt        42,00
 5mt        77,00

The award winning Profile Audio cable delivers amazing sound quality combined with high flexibility for use with today's slimline audio and visual equipment.The award winning Profile Audio cable is a high performance compact and flexible stereo phono to phono interconnect to connect your portable or mini hi-fi components to your amplifier or receiver. All QED cables are covered by a lifetime guarantee FEATURES AND BENEFITSCompact Design Miniature 4mm outside diameter for high flexibility. Figure of 8 construction. Ultra-flexible 99.999% Oxygen free copper conductors provide a low resistance audio pathway Interference Protection Shielded for enhanced signal protection against external interference Compact easy grip connectors 24k Gold plated plugs and miniature connectors to provide ease of installation with slimline equipment




 

PERFORMANCE AUDIO  GRAPHITE Cavo di interconnessione stereo phono-phono con schermatura elettrostatica

 0,6mt     39,00
 1mt        49,00
 3mt        67,00
 5mt        84,00

The multi-award winning Performance range presents the Performance Audio analogue interconnect. Performance Audio utilises design concepts from the high end Reference range to optimise audio performance when connecting your CD player, DAC or Tuner to your amplifier or receiver. These include quasi-balanced geometry, low capacitance dielectric materials and 24k gold plated RCA plugs. All QED cables are covered by a lifetime guarantee.FEATURES AND BENEFITS 99.999% Oxygen Free Copper conductors Provide a low resistance pathway for the audio signal Low density polyethylene dielectric because of its low dielectric constant this material has been used to cut down on the amount of audio signal energy lost due to cable capacitance Ergonomically sculptured zinc plated alloy barrel Provides ease of installation and a stunning finish Quasi-balanced geometry Signal and return conductors are twisted together to give a level of common mode noise rejection above that of conventional unbalanced cables Electrostatic Screen Provides immunity from external high voltage noise signals. Only connected at the source equipment end hence the directionality arrows on the cable jacket.  24k gold plated phono plugs Because gold does not tarnish it provides a lasting low resistance contact  SPECIFICATIONS 99.999% Oxygen Free Copper (OFC) conductors with LDPE dielectric Quasi-balanced twisted pair geometry Al/Mylar wrap provides 100% electrostatic shield structure OFC drain wire completes electrostatic screening  24k Gold plated QED 6 leaf RCA plugs Capacitance: 115pF/m Inductance: 0.74uH/m Loop resistance: 0.160 Ω/m Dissipation Factor: 0.0012
 

PERFORMANCE AUDIO 40 cavo di interconnessione stereo phono-phono che utilizza due conduttori di diametro diverso per fornire un percorso alternativo ai segnali delle alte frequenze, nuovo connettore QED Anamate™ dorato con contatti in puro rame

 0,6mt     61,00
 1mt        68,00
 2mt        83,00
 3mt        98,00
 1mt        11,00

The latest addition to the award winning 'Audio 40' range of products, celebrating over 40 years of industry leading connectivity innovation.Performance Audio 40 shares an almost identical construction and geometry with the award winning Reference and Signature Audio 40 analogue interconnects, omitting only the most expensive components. Through use of QED’s Complementary Conductor ™ Technology, Anamate ™ RCA plugs and floating Ferrite insulation, Performance Audio 40 provides timing and detail to a level rarely delivered by even the most expensive of analogue interconnects Floating internal Ferrite jacket  A special floating Zn/Mn Ferrite jacket is used within the Audio 40 cordage to absorb very high frequency noise components outside of the audible band that have an adverse effect on the micro-timing of the audio signal. With cables, our goal is to replicate as closely as possible the input signal at the cable output. Timing errors mean frequencies have been disrupted and the signal sent by your source equipment has not been accurately replicated. When measured at very high frequencies, Audio 40 cables do exhibit cleaner signal transmission than ordinary audio interconnects. AnamateTM RCA Plugs  The QED AnamateTM plug is a variation of the innovative QED AnalocTM RCA plug found in Reference and Signature Audio 40. A hollow oxygen free copper central pin is used to improve high frequency detail in the same way as our X-TubeTM speaker cables. To reduce swirling 'eddy currents' (that would otherwise oppose signal flow) a unique low mass plug design using two small, high purity copper ground leaves is used. Like putting wooden wheels on a Ferrari, conventional RCA phono plugs have the potential to undo all of the hard work carried out by our carefully designed cordage. With AnamateTM and AnalocTM RCA plugs, the fidelity of the audio signal is maintained form start to finish.  Complementary ConductorTM Technology  Improves timing and detail, retaining the rhythm of the original piece. Unlike conventional analogue interconnects, Performance Audio 40 utilises two 99.999% Oxygen Free Copper conductors of different diameters to carry the same audio signal. This has the effect of providing an alternative path for high frequency audio components which might otherwise become time smeared in a single audio pathway.  Just listen  Performance Audio 40 represents phenomenal value for money. Our extensive listening tests comparing it against competitor products at much higher price points have astonished us! We urge you to compare it not only to your favourite cable but also alternative brands and models at any price!  Specifications •99.999% Oxygen Free Copper (OFC) conductors with foamed PE dielectric-for sonic purity •QED Complementary ConductorsTM•Asymmetrical twisted pair geometry features independent dual layer screening that protects delicate signals against interference from external high voltages and currents.•Twin leaf gold plated QED AnamateTM RCA plugs featuring high purity copper contacts, hollow centre pin and low eddy current design
 

REFERENCE AUDIO 40 cavo di interconnessione stereo phono-phono che utilizza due conduttori di diametro diverso per fornire un percorso alternativo ai segnali delle alte frequenze, nuova guaina in PVC che assorbe i disturbi delle alte frequenze, nuovo connettore QED ANALOC ™ dorato

 0,6mt   143,00
 1mt      168,00
 3mt      209,00
 5 1mt     17,40

The revolutionary Reference Audio 40 analogue audio interconnect celebrates QED's 40 years at the forefront of British designed audio cables The Audio 40 cable range is an entirely new design concept from QED labs. The cordage is designed primarily for low capacitance as this has been identified by QED as a significant factor which leads to a high fidelity experience, making for a tight sound and retaining the rhythm of the original piece. Add our Complementary Conductor TechnologyTM for high frequency detail and our Analoc TechnologyTM to maximise signal integrity and the result is what we feel to be the most innovative interconnect ever made by QED. Please see our 'cables matter' section below for more in-depth information on this ground breaking design.FEATURES AND BENEFITS Complementary Conductor TechnologyTM This innovation utilises two conductors of different diameters to carry the same audio signal. This has the effect of providing an alternative path for high frequency audio components which might otherwise become time smeared in a single audio pathway. FOAMED POLYETHYLENE DIELECTRIC Foamed Polyethylene has a low dielectric constant and has been used to cut down on the amount of audio signal energy lost due to cable capacitance. ANALOCTM Locking RCA Plugs The new QED Analoc™ plug is a low eddy current design featuring small high purity copper conductors in place of the usual large volume brass body found in ordinary high quality plugs. This cuts down or eliminates the tendency for the changing magnetic field in the conductor to induce eddy currents which can affect the micro-timing of the audio signal. SPECIFICATIONS Silver Plated 99.999% Oxygen Free Copper (SPOFC) conductors with LDPE dielectric Asymmetrical twisted pair geometry OFC shield giving 100% electromagnetic screening Zn/Mn ferrite Jacket Gold plated QED ‘Analoc™’ RCA plugs Parallel Capacitance: 76 pF/mInductance: 0.37 uH/mLoop resistance: 0.072 Ω/mDissipation Factor: 0.0059




 

SIGNATURE  AUDIO 40 cavo di interconnessione stereo phono-phono che utilizza due conduttori di diametro diverso per fornire un percorso alternativo ai segnali delle alte frequenze, nuova guaina in PVC che assorbe i disturbi delle alte frequenze, nuovo connettore QED ANALOC ™ placcato rodio

 0,6mt    285,00
 1mt       335,00
 3mt       452,00

The groundbreaking Signature Audio 40 analogue audio interconnect celebrates QED's 40 years at the forefront of British designed audio cables Signature Audio 40 is an entirely new design concept from QED laboratories. The cordage is designed primarily for low capacitance as this has been identified by QED as a significant factor leading to a high fidelity experience and makes for a tight sound retaining the rhythm of the original piece. Add our Complementary Conductor TechnologyTM for high frequency detail and our Analoc TechnologyTM to maximise signal integrity and the result is what we feel to be the most innovative interconnect ever made by QED. Please see our 'cables matter' section below for more in-depth information on this ground breaking design.FEATURES AND BENEFITS Complementary Conductor TechnologyTM This innovation utilises two conductors of different diameters to carry the same audio signal. This has the effect of providing an alternative path for high frequency audio components which might otherwise become time smeared in a single audio pathway.TEFLON DIELECTRIC  This material with its low dielectric constant has been used to cut down on the amount of audio signal energy lost due to cable capacitance. Cryogenic treatment It is understood that cryogenic treatment results in the elimination of dislocations and fractures in the material’s micro-structure. Trumpets and other brass instruments have been found to produce a better tone after Deep Cryogenic Treatment (below −190 °C, −310 °F) and it also extends their working life. Our extensive listening tests have shown that the cryogenically treated cable is preferred over the same cable without the treatment. ANALOCTM Locking RCA Plugs The new QED Analoc™ plug is a low eddy current design featuring small high purity copper conductors in place of the usual large volume brass body found in ordinary high quality plugs. This cuts down or eliminates the tendency for the changing magnetic field in the conductor to induce eddy currents which can affect the micro timing of the audio signal. Rhodium plating has the advantage for use as a plating material due to its superior hardness. SPECIFICATIONS Silver Plated 99.999% Oxygen Free Copper(SPOFC) conductors with Teflon™ dielectric Asymmetrical twisted pair geometry SPOFC shield giving 100% electromagnetic screening Zn/Mn ferrite Jacket Rhodium plated QED ‘Analoc™’ RCA plugs Cryogenically Treated Capacitance: 63pF/m Inductance: 0.37uH/m Loop resistance: 0.072 Ω/m Dissipation Factor: 0.0011 QED Lifetime Guarantee

REFERENCE  AUDIO EVOLUTION XLR cavo di interconnessione specificatamente progettato per la  trasmissione stereo di segnali audio bilanciati analogici, doppia schermatura elettromagnetica, pin XLR placcati oro

 1mt       209,00
 1,5mt    235,00
2 2mt     260,00

Reference XLR 40 builds on the multi-award winning Audio 40 range of products, now available in XLR form.  XLR 40 is designed primarily for low capacitance as this has been identified by QED as a major factor which leads to a high fidelity experience. Further steps have been taken to eliminate minute timing errors in the cable by the use of a special floating Zn/Mn ferrite jacket alongside use of QEDs unique 'Tri-Conductor' technology reducing signal to ground capacitance to vanishingly low levels. FEATURES AND BENEFITS Award Winning Heritage  Reference XLR 40 builds on the multi-award winning Audio 40 range of products, now available in XLR form. QED have joined forces with world renowned professional audio connector supplier Neutrik (UK) to bring you an innovative new XLR balanced interconnect cable with legendary build quality and reliability.  Professional Standard Neutrik plugs  Neutrik XX-14 Nickel Series XLR gold plated connectors are provided as standard with Reference XLR 40 cables. These connectors are rugged and reliable and are the connector of choice for audio professionals around the world. They are particularly suited to QED's Tri-ConductorTM geometry due to the additional ground spring contacts which make for better shell ground continuity for the unique electrostatic screen which is only connected at the source end of the cable.  Silver plated conductors, LDPE dielectrics and legendary build quality combine to create audible sonic improvements. We urge you to compare Reference XLR 40 not only to your favourite cable but also alternative brands and models at any price! Floating ferrite jacket  Absorbs high frequency noise signal components outside the audio band. When measured using high frequency measurement equipment, Audio 40 products convey a comparably cleaner and tighter signal pattern when its special Zn/Mn ferrite jacket is present.  Unique Tri-conductor Technology  QEDs unique Tri-Conductor technology uses a third Silver plated 99.999% OFC conductor which is integrally twisted alongside the similarly constructed signal pair to carry the ground return currents. This reduces signal to ground capacitance to vanishingly low levels affording the cable improved common mode rejection of mains hum pickup over ordinary "hot cold and screen" cables. This geometry is particularly effective in pro hi-fi audio applications when connecting pre and power amps using balanced cables. Specifications  99.999% Silver Plated Oxygen Free Copper 24 AWG Tri-Conductors with foamed PE dielectric QED Tri-Conductors provide a level of common mode rejection not found in ordinary "hot cold and screen" cables Unique floating Zn/Mn impregnated ferrite jacket 99.999% OFC outer shield braid for 100% electrostatic screening High performance gold plated Neutrik XLR connectors with low contact resistance and high signal integrity Conductor Section 0.25 mm2Parallel Capacitance 35 pF Self Inductance 0.8 uH Loop resistance 0.130 Ω /m Dissipation Factor@10kHz 0.0001 Nominal Outside Diameter 8 m QED Lifetime Guarantee



 

PROFILE J2P cavo di interconnessione audio analogico J2P: jack 3.5mm -  stereo phono per collegare MP3, PC ecc. ad amplificatore o receiver

 1mt        24,00
 2mt        28,00
 3mt        32,00
 5mt        36,00

PROFILE J2J cavo di interconnessione audio analogico J2J: jack-jack  3.5mm per collegare MP3, PC ecc. ad ingresso linea ausiliario

 1mt        18,00
 2mt        24,00
 3mt        36,00
 5mt        43,00

PERFORMANCE AUDIO J2P cavo di interconnessione jack 3.5mm - stereo phono a design coassiale per migliorare il trasferimento del segnale ed elettricamente schermato

 1,5mt     42,00
 3mt        54,00

PERFORMANCE AUDIO J2J cavo di interconnessione jack - jack 3.5mm a design coassiale  per migliorare il trasferimento del segnale ed elettricamente schermato

 1,5mt     45,00
 3mt        60,00

REFERENCE AUDIO J2P cavo di interconnessione jack 3.5mm - stereo phono, tripla  schermatura elettromagnetica, conduttori placcati argento,

1,5mt    101,00

PERFORMANCE DIGITAL AUDIO cavo digitale coassiale 75 Ohm con doppia schermatura elettrica - per collegare CD o DVD o altra sorgente SPDIF a un DAC o an un amplificatore AV

 1mt        68,00
 3mt      101,00
 1mt        15,20

REFERENCE DIGITAL AUDIO cavo digitale coassiale 75 Ohm con tripla schermatura  elettrica e conduttori placcati argento - per collegare CD o DVD o altra sorgente SPDIF a un DAC o an un amplificatore AV

1mt       144,00
 3mt      203,00

SIGNATURE DIGITAL AUDIOcavo digitale coassiale 75 Ohm con tripla schermatura  elettrica e conduttori placcati argento, connetori RCA placcati oro - per collegare CD o DVD o altra sorgente SPDIF a un DAC o an un amplificatore AV

 1mt       171,00

PROFILE OPTICAL   DIGITAL AUDIO cavo di interconnessione Toslink compatto e flessibile

1mt         27,00
2mt         31,00
3mt         33,00
5mt         51,00

PERFORMANCE GRAPHITE OTPICAL DIGITAL cavo Toslink per collegare CD o DVD o Decoder TV Digitale o Console giochi all'amplificatore AV o al sintoamplificatore, ideale per applicazioni multicanale, cavo in fibra ottica in plastica per assicurare una minima perdita di segnale e bassissima attenuazione, ottimo trafserimento del segnale anche su lunghe distanze

1mt         67,00
 1,5mt     72,00
 2mt        76,00
 3mt        84,00
 5mt      101,00
 7mt      116,00
  10mt   133,00

REFERENCE OPTICAL QUARTZ  cavo Toslink per collegare CD o DVD o Decoder TV Digitale o Console giochi all'amplificatore AV o al sintoamplificatore, utilizza la nuova tecnologia QED GLASSCORE™ cioè un conduttore composto di numerosissime e sottilissime fibre ottiche che consentono al segnale di scorrere in maniera omogenea e senza distorsioni

 0,6mt   134,00
 1mt      151,00
 1,5mt   168,00
 2mt      201,00
 3mt      251,00

PERFORMANCE GRAPHITE USB (A-B) cavo USB A-B, tripla schermatura, ideale per la trasmissione del segnale audio digitale ad alta definizione tra componenti USB (ad es. PC-DAC), ideale per applicazioni audio fino a 24 bit / 192kHz

 1mt        26,00
 1,5mt     31,00
 2mt        34,00
 3mt        42,00
 5mt        51,00

PERFORMANCE GRAPHITE USB (A-B) MINIPerformance Graphite USB A-B MINI, tripla schermatura, ideale per la trasmissione del segnale audio digitale ad alta definizione tra componenti USB (ad es. PC-DAC), ideale perapplicazioni audio fino a 24 bit / 192kHz

 1mt        31,00
 1,5mt     34,00
 2mt        39,00
 3mt        42,00
 5mt        56,00

PERFORMANCE GRAPHITE ETHERNET cavo di rete CAT6, ideale con file ad alta densità quali 24/192  con cui la trasmissione wi-fi è instabile, ad es. con i prodotti per streaming

 1mt        26,00
 1,5mt     31,00
 2mt        34,00
 3mt        42,00
 5mt        51,00

PERFORMANCE HEADPHONE EXTENSION GRAPHITE prolunga per cuffie, geometria che minimizza le interferenze, connettori placcati oro da 3,5mm,

1,5mt      42,00
3mt         51,00
5mt         59,00

PERFORMANCE HEADPHONE EXTENSION GRAPHITE  prolunga per cuffie, geometria che minimizza le interferenze, connettori placcati oro da 6,35mm,

 1,5mt     67,00
 3mt        76,00
 5mt        84,00

PROFILE SUBWOOFER cavo di interconnessione per subwoofer ultracompatto e  flessibile

 3mt        33,00

 6mt        44,00

 10mt      59,00

PERFORMANCE SUBWOOFER cavo per subwoofer, doppia schermatura elettrostatica, per collegare amplificatore AV o sintoamplificatore a un subwoofer attivo

 3mt        68,00
 6mt       103,00
 10mt     162,00
 1mt        12,00

PERFORMANCE MINIATURE SUBWOOFER cavo per subwoofer, costruzione coassiale, doppia schermatura elettrica, per collegare amplificatore AV o sintoamplificatore a un subwoofer attivo

 3mt        68,00
 6mt      103,00
 10mt    162,00
 1mt        12,00

REFERENCE SUBWOOFER cavo per subwoofer, doppia schermatura elettrostatica, conduttori placcati argento, connettori placcati oro, per collegare amplificatore AV o sintoamplificatore a un subwoofer attivo

 3mt      129,00
 6mt      186,00
 10mt    256,00
 1mt        22,50

SIGNATURE SUBWOOFER cavo per subwoofer, doppia schermatura elettrostatica,  conduttori placcati argento, connettori placcati oro, per collegare amplificatore AV o sintoamplificatore a un subwoofer attivo

 3mt      184,00
 6mt      235,00

QEDPARCA/10R  connettori Performance Audio 40 RCA rossi     cadauno   8,00 euro

 QEDPARCA/10B   connettori Performance Audio 40 RCA           cadauno  8,00  euro

QEDPDARCA/10 connettori Performance Digital Audio RCA        cadauno  9,00  euro

QEDPSWRCA/10 connettori Performance Subwoofer RCA           cadauno  9,00  euro

QEDPMSWRCA/10 connettori Performance Miniature Subwoofer RCA  cadauno  9,00  euro

 ABS 4mm PLUG connettori a vite a banana 4mm 2rossi+2neri     36,00  euro

The screwloc forte 4mm Banana Plug and spades are the ideal finishing connection to ensure you get the best from your speaker cable Designed for use where speed and convenience are the paramount concern, these connectors make the most of the Screwloc style termination providing a twin conductor clamp to suit cable diameters up to 3.25mm. The new forte plugs are 24k Gold Plated which has a resistivity almost as low as copper but more importantly does not oxidise in air. FEATURES AND BENEFITS The new Forte banana plug section is designed to maximise contact area throughout the wide tolerance range encountered in 4mm amplifier and speaker sockets. Some can be quite tight whereas others may be loose, so the spring loaded Forte blade is designed to fit into smaller and larger sockets with equal insertion force. This means that the contact area is maximised and the connection remains uniformly tight. Screwloc spade plugs are 'duo' to enable secure contact with both standard and wide spade terminals. Both the banana plugs and spades are made of brass which has roughly twice the resistivity of copper. For this reason the plug was devised so that its cross-sectional area would be at least double that of the cable to which it was connected effectively cancelling out the extra resistance of the plug material. QED then plates the connector with high purity gold which has a resistivity almost as low as copper but more importantly does not oxidise in air.
 

ABS DUO SPADE connettori a vite a forcella 4mm 2rossi+2neri    43,00  euro

The screwloc forte 4mm Banana Plug and spades are the ideal finishing connection to ensure you get the best from your speaker cable Designed for use where speed and convenience are the paramount concern, these connectors make the most of the Screwloc style termination providing a twin conductor clamp to suit cable diameters up to 3.25mm. The new forte plugs are 24k Gold Plated which has a resistivity almost as low as copper but more importantly does not oxidise in air. FEATURES AND BENEFITS The new Forte banana plug section is designed to maximise contact area throughout the wide tolerance range encountered in 4mm amplifier and speaker sockets. Some can be quite tight whereas others may be loose, so the spring loaded Forte blade is designed to fit into smaller and larger sockets with equal insertion force. This means that the contact area is maximised and the connection remains uniformly tight. Screwloc spade plugs are 'duo' to enable secure contact with both standard and wide spade terminals. Both the banana plugs and spades are made of brass which has roughly twice the resistivity of copper. For this reason the plug was devised so that its cross-sectional area would be at least double that of the cable to which it was connected effectively cancelling out the extra resistance of the plug material. QED then plates the connector with high purity gold which has a resistivity almost as low as copper but more importantly does not oxidise in air.
 

 PROFILE EFLEX HDMI  cavo HDMI FLESSIBILE HS con Ethernet: basso jitter, 3D  compatibile, full HD, supporta la risoluzione 4K, deep colour, audio return

 1mt    34,00
 1,5mt 39,00
 2mt    42,00
 3mt    51,00

PERFORMANCE GRAPHITE HDMI HS cavo HDMI 1.4 HighSpeed con Ethernet: bassissimo jitter per  un'accurata sincronia delle immagini, 3D compatibile, full HD, supporta la risoluzione 4K x 2K, deep colour, audio return

0,6mt  34,00
 1mt    42,00
 1,5mt 47,00
 2mt    51,00
 3mt    59,00
 5mt    76,00

PERFORMANCE ACTIVE HDMI HS nuovo cavo HDMI HIGH SPEED con Ethernet, full HD, 3D e 4K compatibile, xv Colour, audio return

 8mt    193,00
 10mt  235,00
 12mt  276,00
 15mt  318,00

PERFORMANCE E-FLEX GRAPHITE HDMI cavo HDMI FLAT HighSpeed con Ethernet: bassissimo jitter, 3D compatibile, guaina 100% mylar per ridurre le interferenze elettriche solitamente presenti nei cavi HDMI piatti

 1mt        42,00
 1,5mt     47,00
 2mt        51,00
 3mt        59,00
 5mt        76,00

REFERENCE HDMI HS cavo HDMI 1.4 HighSpeed con Ethernet: speciale tecnologia a  filtro passa banda per un jitter ultra basso e una sincronia immagini più accurata possibile, 3D compatibile, full HD, supporta la risoluzione 4K x 2K, deep colour, audio return

 0,6mt     84,00
 1mt      101,00
 1,5mt   117,00
 2mt      126,00
 3mt      159,00

QED WIRELESS   WIRELESS uPLAY Bluetooth receiver per controllare via iPod, iPhone ecc. la musica da remoto (fino a 10 mt) sul sistema hi-fi o su altri apparecchi audio dotati di ingresso stereo o linea, compatibile con: iPhone™ 3G, 3GS, 4 e 4S; iPod™ Touch 2nd e 3rd Gen; iPad, iPad2 e the New iPad; PDAs e telefoni dotati di Bluetooth™; Computers e Netbooks dotati di Bluetooth™

 

150,00  euro

WIRELESS  uPLAY PLUS Bluetooth receiver per controllare via iPod, iPhone ecc. la musica da remoto (fino a 10 mt) sul sistema hi-fi o su altriapparecchi audio dotati di ingresso stereo o linea, utilizza la più recente tecnologia BlueCore TM ed è dotato di connessione analogica (phono) e digitale (ottica), compatibile con: iPhone™ 3G, 3GS, 4, 4S e 5; iPod™ Touch 2nd, 3rd e 4th Gen; iPad, iPad2 e the New iPad; PDAs e telefoni dotati di Bluetooth™; Computers e Netbooks dotati di Bluetooth™
 

161,00  euro

WIRELESS uPLAY STREAM hi fi network music streamer con apps dedicate e molto  semplici da usare: Wi-Fi streaming da Android, iPhone, iPad e Tablet; Wi-Fi streaming da server quali PC e Network Storage; Wi-Fi streaming da Cloud Storage, Drop BoxTM e
SkyDriveTM; 24-bit/96kHz compatible Wolfson DAC; possibilità di Multi Room fino a 8 uPlay Stream; iOS &  Android dedicated uPlay Controller App; Windows 7 & 8 Media Player compatible; facile set-up; DLNA/UPnP Compliant; Formati Audio Supportati: MP3, AAC, WMA, WAV, FLAC, Apple Lossless; connessione analogica a phono e 3.5mm jack

317,00  euro

COMMUTATORI PER DIFFUSORI SS20 per 2 cp di diffusori in parallelo                                                   143,00
COMMUTATORI PER DIFFUSORI SS21 per 2 cp di diffusori in parallelo con morsetti                                178,00
COMMUTATORI PER DIFFUSORI SS30 per 3 cp di diffusori in serie e parallelo                                        163,00
COMMUTATORI PER DIFFUSORI SS40 per 4 cp di diffusori in serie e parallelo                                        193,00
COMMUTATORI PER DIFFUSORI SS50 Transmatch per 5 cp di diffusori                                                  394,00

Telefona o invia un  e-mail per avere l'ultima offerta   0174 670100   Telefona o invia un  e-mail per avere l'ultima offerta  0174 670100  info@newaudio.it

Telefona o invia un  e-mail per avere l'ultima offerta   0174 670100   Telefona o invia un  e-mail per avere l'ultima offerta  0174 670100  info@newaudio.it

 Legenda istruzioni

Clicca per qui per vedere :  FOTO PRODOTTO

Clicca per qui per vedere :  ISTRUZIONI PRODOTTO

Clicca per qui per vedere :  CATALOGO,PROVA RIVISTE SPECIALIZZATE PRODOTTO

Nota  bene *

Per ordinare o avere gli ultimi prezzi aggiornati telefona al  0174 670100 o invia un E-mail a   info@newaudio.it

*I prezzi indicati  sono  di  listino  ufficiale  delle case produttrici ,nel  caso  di  diffusori  si  riferisce al prezzo  del  singolo  diffusore  per  offerte  ed  eventuali  promozioni  telefonare o  inviare e-mail.

*Il presente listino sostituisce ed annulla ogni precedente. Le caratteristiche e i prezzi indicati  possono variare senza preavviso telefonare o inviare un e-mail per ulteriori domande e conferme sui prezzi sopra riportati.

*Tutti i marchi citati nel presente listino sono di proprietà e registrati alle rispettive Case Produttrici

*Prezzi franco nostro magazzino

Telefona o invia un  e-mail per avere l'ultima offerta   0174 670100   Telefona o invia un  e-mail per avere l'ultima offerta  0174 670100  info@newaudio.it